Sharp XG-NV5XU User Manual download pdf

Quick Start Reference Sheet

Sharp XG-NV5XU

Revision B

DR-SHP10 – 7/2/01 SP Controls reserves the right to modify specifications without notice at any time.

NOTE: This document is intended

only as a quick reference for installation

– please read the following

SP Controls Application Note for a complete description of this projector driver prior to installation.

I. Driver Features

1. Input Selection Mapping

Selection 1:

VIDEO

Selection 2:

VIDEO

Selection 3:

RGB 1

Selection 4:

RGB 2

2. Hidden Function Mapping

Selection 1:

KEYSTONE

Selection 2:

ENTER

Selection 3:

ADJUST LEFT

Selection 4:

ADJUST RIGHT

Off:

Volume Up:

ADJUST UP

Volume Down:

ADJUST DOWN

3. Other Driver Features

Power Status Feedback Method

None (Power Polling Unavailable)

Control Wiring Option

None (IR Emitter Only)

II. Wiring Specifications

NOTE: For a wiring diagram, please see the SP Controls Application Note for the Sharp XG-NV5XU

1. RS-232:

Wire the Panel RS-232 port to a female DB9 as follows:

TX to 2

RX to 3

GND to 5

Connect this female DB9 to the projector port labeled

RS-232C

2. Infrared Emitter:

Wire the Panel IR/Serial port to a female 1/8" Mini as follows:

IR/SER

tip

GND

ring

Direct wiring to the IR Emitter is not recommended as it makes removal of the Panel for service more

difficult.

Attach to any projector IR port using the Panel’s IR Emitter (included with the Panel).

Note that the emitter glows red when IR is emitted so wiring can be verified.

III. Additional Projector Information

Projector control is through the IR emitter only due to a Sharp Firmware problem with the RS-232 port on

this projector. For a complete discussion of the history of this problem, please see the SP Controls

Application Note for the Sharp XG-NV5XU.

NOTE:

The Sharp Automatic Power Shutoff feature

must be disengaged for installation or the

projector may become out of sync with the Panel. To disable the Automatic Power Shutoff, navigate

through the Sharp on-screen menu with the remote control or hidden functions and select the

OPTION

menu. Scroll down to

Background

and select

None

1 2 3 4 5 6

Summary of Contents

Page 1

Quick Start Reference SheetSharp XG-NV5XURevision BDR-SHP10 – 7/2/01 SP Controls reserves the right to modify specifications without notice at any tim

Page 2 - I. PROJECTOR CONTROL

Projector Driver Application NoteSharp XG-NV5XURevision BDR-SHP10 – 7/2/01 SP Controls reserves the right to modify specifications without notice at a

Page 3

Page 4 - II. CONTROL WIRING

Page 5 - IV. TECHNICAL NOTES

Page 6 - VI. REVISION HISTORY