Sharp DX-B450P Installation Manual download pdf (Page 20)

2-10 Installation Manual

Selecting a Display Language

Basic Installation

Selecting a Display Language

The default language for all LCD display messages, the Configuration Summary, and the Test

Page is English. You can change to one of several languages. Navigate through the System

Menu to select the desired language:

NOTE: The language that you select will be reflected on all LCD display messages, and also the content of

the Configuration Summary.

Printing a Configuration Summary

Your printer can print a Configuration Summary that lists the currently selected status of menu

options, media selections in trays, options installed and other relevant information about your

printer. To print a Configuration Summary, press the INFO button on the Operator Panel.

Setting an IP Address Manually

This action is only needed if you must set an IP address manually. If you receive an IP address

from a DHCP source, then you do not need this action. DHCP is On by default. You must turn

DHCP Off by navigating through the Interface and Network Setup Menus in the Operator

Panel.

Using the Embedded Web Site

The printer has an embedded web site that can be used to set many configuration items and

observe the status of the printer. If the printer is connected to a network, point your browser to

the printer's IP address to use this to configure the printer. Consult the User’s Guide located on

the CD-ROM for further help.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 26 27 28

No comments

Sharp DX-B450P Installation Manual Page 20