Sharp DX-B450P Installation Manual download pdf (Page 19)

Installation Manual 2-9

Using the Operator Panel

Basic Installation

Turning the Printer On

NOTE: The printer motors run for 2 or 3 minutes when you first turn the power on.

The printer displays a series of messages and then displays READY when it is available for use.

NOTE: While turned on, the printer will go into the standby state if it remains idle for a period of time.

When you have finished using the printer for the day or you do not intend to use it for a long

period of time, switch off the power.

Using the Operator Panel

To configure the printer, press the MENU button and use the NEXT, RETURN and

PREVIOUS buttons to navigate through the Operator Panel options and the SELECT button

to choose the option. You can use the CANCEL button to exit any current selection.

1. Press the power switch to the <I>

position to turn the power on.

INFO

CANCEL

START/STOP

FAULT

ACTIVE

SELECT

STATUS

RETURN

LCD Display

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 27 28

No comments

Sharp DX-B450P Installation Manual Page 19