Sharp AR-5516S Specifications download pdf (Page 12)

SETUP

CONNECTING TO A COMPUTER

(AR-5516S/AR-5520S/AR-5516/AR-5520/AR-5516D/AR-5520D)

Follow the procedure below to connect the machine to your computer.

A USB cable for connecting the machine to your computer is not included with the machine. Please purchase the

appropriate cable for your computer.

Interface cable

USB cable

Shielded twisted pair cable, high-speed transmission equivalent (3 m max.)

If the machine will be connected using a USB 2.0 interface, please purchase a USB cable that supports USB 2.0.

CONNECTING A USB CABLE

Insert the cable into the USB connector on

the machine.

Insert the other end of the cable into

your computer's USB connector.

• USB is available with a PC/AT compatible computer that was originally equipped with USB and had Windows

2000 Professional, Windows XP Professional, Windows XP Home Edition or Windows Vista preinstalled.

• Do not connect the USB cable before installing the Printer/MFP driver. The USB cable should be connected

during installation of the Printer/MFP driver.

Caution

System requirements for USB 2.0 (Hi-Speed mode)

• The machine's USB 2.0 connector will transfer data at the speed specified by the USB 2.0 (Hi-Speed) only if the

Microsoft USB 2.0 driver is preinstalled in the computer, or if the USB 2.0 driver for Windows 2000

Professional/XP/Vista that Microsoft provides through its "Windows Update" Web page is installed.

• Even when the Microsoft USB 2.0 driver is used, it may not be possible to obtain full USB 2.0 speed if a PC card

supporting USB 2.0 is used. To obtain the latest driver (which may enable a higher speed), contact the

manufacturer of your PC card.

• Connection is also possible using a USB 1.1 port on your computer. However, the specifications will be USB 1.1

specifications (Full-Speed).

• If your computer is not compatible with USB 2.0 (Hi-Speed), the "USB 2.0 mode switching" setting in the

machine's system setting must be set to "Full-Speed". For more information, see "SYSTEM SETTINGS" in the

Operation Guide.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 31 32

No comments

Sharp AR-5516S Specifications Page 12