Sharp LC-65D93U Operations Instructions Page 54

  • Download
  • Add to my manuals
  • Print
  • Page
    / 70
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 53
Appendix
Problem
Possible Solution
No power
Check
if
you pressed TV POWER on the remote control unit.
(See
page 16.)
If
the
indicator on the
TV
does not light up, press POWER on the
TV.
Is
the AC cord disconnected?
(See
page
7.)
Has the power been turned on?
(See
page 16.)
Unit cannot be operated.
External influences such
as
lightning, static electricity, may cause improper
operation.
In
this case, operate the unit after first turning on the power of the TV or
unplugging the AC cord and replugging
it
in
after 1 or 2 minutes.
Remote control unit does not
Is
the FUNCTION set correctly? Set
it
to the TV setting position.
operate. Are batteries inserted with polarity
(+,
-)
aligned?
(See
page
8.)
Are batteries worn out? (Replace with new batteries.)
Are you using
it
under strong or fluorescent lighting?
Is
a fluorescent light illuminated near the remote control sensor?
Picture
is
cut off/with sidebar
Is
the image position correct?
(See
page 34.)
screen.
Are screen mode adjustments such
as
picture size made correctly?
(See
pages 36
and 37.)
Strange color, light color, or color Adjust the picture tone.
(See
pages 26 and 27.)
misalignment
Is
the room too bright? The picture may look dark
in
a room that
is
too bright.
Check the input signal setting.
(See
page 39.)
Power
is
suddenly turned off.
Is
the sleep timer set?
(See
page 35.)
Check the power control settings.
(See
page 29.)
The unit's internal temperature has increased. Remove any objects blocking vent
or clean.
No picture
Is
connection to other components correct?
(See
pages 13 to 15.) ,
Is
correct input signal source selected after connection?
(See
page 30.)
Is
the correct input selected?
(See
page 30.)
Is
picture adjustment correct?
(See
pages 26 and 27.)
Is
"On" selected
in
"Audio Only"?
(See
page 38.)
Is
a non-compatible signal being input?
(See
page 15.)
No sound
Is
the volume too low?
(See
page 19.)
Is
"Variable" selected
in
"Output Select"?
(See
page 38.)
Have you pressed
MUTE
on the remote control unit?
(See
page1
9.)
The TV sometimes makes a This
is
not a malfunction. This happens when the cabinet slightly expands and
cracking sound.
contracts according to change
in
temperature. This does not affect the TV's
performance.
The error message about reception of broadcast
The example of an error
Error code
Possible Solution
message displayed on a screen
Failed to receive broadcast.
E202
Check the antenna cable. Check that the antenna
is
correctly
setup.
No broadcast now.
E203
Check the broadcast time
in
the program guide.
Cautions regarding use
in
high and low temperature environments
When the unit
is
used
in
a low temperature space
(e.g.
room, office), the picture may leave trails or appear slightly delayed.
This
is
not a malfunction, and the unit will recover when the temperature returns to normal.
Do
not leave the unit
in
a hot or cold location. Also, do not leave the unit
in
a location exposed to direct sunlight or near a
heater,
as
this may cause the cabinet to deform and the Liquid Crystal panel to malfunction.
Storage temperature: - 4°F to
+ 140°F (- 20°C to + 60°C)
@-S3
Page view 53
1 ... 53 54 55 ... 70

Comments to this Manuals

No comments