Sharp LC-65D93U Operations Instructions Page 34

  • Download
  • Add to my manuals
  • Print
  • Page
    / 70
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 33
Useful adjustment settings
Centers the image by moving
it
to the
left or right.
Centers the image by moving
it
up or
down.
Press
./T
to select the specific adjustment
item.
V-Pas.
H-Pos.
Ordinarily you can easily adjust the picture as
necessary to change image position using Auto Sync.
In
some cases, however, manual adjustment
is
needed
to optimize the image.
Press
MENU
to display the MENU screen,
and then press
......
/~
to select "Setup".
Press
./T
to select "Fine Sync.", and then
press
ENTER.
Press
......
/~
to select "Yes", and then press
ENTER.
Auto Sync. starts and "Now adjusting the
image." displays.
Press
./T
to select "Auto Sync.", and then
press
ENTER.
Press
MENU
to display the MENU screen,
and then press
......
/~
to select "Setup".
For automatically adjusting the
PC
image.
Press
MENU
to exit.
Clock Adjust when the image flickers with
vertical stripes.
When Auto Sync.
is
successful, "Completed" displays.
If
not, Auto Sync. failed.
Auto Sync. may
fail
even
if
"Completed" displays.
Auto Sync. may
fail
if
the computer image has low
resolution, has unclear (black) edges, or
is
moved while
executing Auto Sync.
Be sure to connect the
PC
to the
1V
and switch
it
on
before starting Auto Sync.
It
is
not necessary to use "Auto Sync." when digital signal
is
being input, so
it
cannot be selected.
Phase Adjust when characters have low
contrast or when the image flickers.
Press
......
/~
to adjust the item to your desired
position.
Press
MENU
to exit.
For resetting
all
Fine
Sync. adjustment items to the factory
preset values, press
./T
to select "Reset", and then
press ENTER.
It
is
not necessary to adjust the "Clock" or "Phase" when a
digital signal
is
being input, so
it
cannot be selected.
@-33
Page view 33
1 ... 33 34 35 ... 70

Comments to this Manuals

No comments