Sharp DV-MX1U User Manual Page 23

  • Download
  • Add to my manuals
  • Print
  • Page
    / 36
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 22
23
LokSoundXL User Manual V2.1 05/2002
List of all supported CVs
CVCV
CVCV
CV
namename
namename
name
descriptiondescription
descriptiondescription
description
rangerange
rangerange
range
defaultdefault
defaultdefault
default
17 Extended long address of locomotive 128 - 0
18 locomotive address CV 17 contains byte with higher value (Bit 6 and 9999
Bit 7 must always be active), CV18 contains
byte with lower value. Only active when function
in CV 29 is switched on. (see below)
19 Consist address Additional address for consist 0 - 127 0
value 0 means: consist address deactivated
23 Acceleration Additional period of acceleration which is added 0 - 25 5 0
adaptation to or deducted from the base value (CV 3)
values from 0 - 127 are added to the base value,
values > 128 are deducted.
Mathematical: bit 0-6 represents the value,
bit 7 indicates plus (0) or minus (1)
(see DCC Standards)
24 Deceleration Additional period of deceleration, which is added 0 - 255 0
adaptation to or deducted from the base value (CV 4)
values from 0 - 127 are added to the base value,
values > 128 are deducted.
Mathematical: bit 0-6 represents the value,
bit 7 indicates plus (0) or minus (1)
(see DCC Standards)
29 Configuration register The most complex CV within the DCC standards. - 4
This register contains important information,
which is only relevant in DCC operation.
Bit function value
0 Reverse direction of travel
(forward becomes reverse)
normal direction 0
reversed direction 1
1 speed steps (only for DCC operation)
14 speed steps 0
28 or 128 speed steps 2
2 analogue operation
analogue operation switched off 0
analogue operation permitted 4
4 selection of speed curve
speed curve through CV 2,5, 6 0
speed curve through CV 67 - 96 16
5 selection of locoaddress (only for DCC operation)
short addresses (CV 1) in DCC operation 0
long addresses (CV 17 + 18) in DCC operation 32
Page view 22
1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 35 36

Comments to this Manuals

No comments