Sharp AR-FX12 Specifications download pdf (Page 42)

AR-FX12 SIMULATIONS, FAX SOFTWARE SWITCH 6-30

9 7,8 Not used 0

10 1-4 Ring back tone ON time Used to set the pseudo-ringing to an external telephone and the ring back tone

ON time to the line.

Setting can be made in the range of 0 ~ 3sec in the increment of 200ms.

When set to 0, however, same as setting to 1sec.

0 1sec

5-8 Ring back tone OFF

time

Used to set the pseudo-ringing to an external telephone and the ring back tone

OFF time to the line.

Setting can be made in the range of 0 ~ 3sec in the increment of 200ms.

When set to 0, however, same as setting to 2sec.

When set to less than 2sec, busy tone may be erroneously detected.

1 2sec

11 1-4 Image quality priority

selection (Standard

image quality setup)

Used to set the initial setting of image quality selection when scanning a

document by FAX. When set to "0100," "1000," "1001" and later, the same

operation is made as normal characters.

0 Normal text Operation

setup

5 Automatic wake up

mode

Used to set whether the machine is automatically wake up and the received

document is outputted or the received document is saved in memory and will be

outputted when the power is turned on next time when a FAX message is

received with the main SW ON and the FAX power SW ON or in the power save

mode.

0 Output Initial setup

6 Not used 0

7 Image quality setup

when saving(FAX)

Used to set whether the initial setting is set to Enable of the image quality of

filed documents when FAX-sending filed documents.

0 Not applied Operation

setup

8 Selection of resend

page in case of an error

Used to select resend pages in case of an error in transmission without F code.

If transmission includes F code, all pages are resent.

0 After the

error page

12 1-8 External telephone off-

hook detection time

Used to set the time to recognize external telephone off-hook detection.

The set range is 0ms - 255ms in the increment of 10ms by binary input.

0 300ms

13 1-8 Remote switch number

setup

Used to set the number for remote switch receive from an external telephone by

binary input.

However, remote switch numbers of "XX*" and "*" are fixed.

When set to "C" (BCD) or above, same as setting to the initial value of "5"

(BCD).

0 5* Initial setup

14 1 Remote reception

instruction

Used to set YES/NO of remote switch from an external telephone. 0 YES

No.

Bit

No.

Item Switch selection and function USA Initial value Key

operator

Bit No. 1234

Normal text 0000

Fine 0001

Super fine 0 0 1 0

Ultra fine 0 0 1 1

Fine (Half tone) 0 1 0 1

Super fine (Half tone) 0 1 1 0

Ultra fine (Half tone) 0 1 1 1

1: Saved in memory

without booting

machine

0: Output by automatic

booting of machine

1: Applied 0: Not applied

1: All pages

(Resend all pages from the

first page including

transmitted pages.)

0: After error page

(Resend after error

page)

55 (Japan) 5* (Outside Japan)

1: NO (remote switch

disable)

0: YES (Remote switch

enable)

[06]SIMULATIONS ･ FAXSOFTWARESWITCH.fm 30 ページ２００４年１０月２６日　火曜日　午後３時４４分

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 121 122

Comments to this Manuals

No comments

Sharp AR-FX12 Specifications Page 42

Comments to this Manuals

Related products and manuals for Copiers Sharp AR-FX12