Sharp AR-164 Specifications download pdf (Page 37)

SPECIAL FEATURES

Place the original on the original table and close the

platen cover.

●

The SPF can also be used for this feature.

Press the ERASE key to select the desired erase mode.

●

To select the EDGE + CENTER ERASE mode, press the ERASE key

until both the EDGE and CENTER indicators light up.

Check the copy paper size.

●

The bypass tray and any tray with non-standard size paper cannot be

used for this feature.

●

If an optional paper feed unit is installed, use the TRAY SELECT key

to select the desired paper size.

Erase

ERASE

This copier has an edge erase mode and a center erase mode.

●

Edge erase can be used to eliminate shadow lines around the edges of

copies caused when thick paper or a book is used as an original.

●

Center erase can be used to eliminate the shadow produced by the

bindings of bound documents.

●

Edge + center erase can be used to eliminate shadow lines around the

edges of copies and to eliminate the shadow at the center of copies.

●

The erase width can be set from 0" to 1" in five steps using user program

No. 16. See page 46.

●

This feature cannot be used with the 2 in 1 or 4 in 1 feature.

A B

Center erase

Edge + Center erase

Edge erase

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 79 80

No comments

Sharp AR-164 Specifications Page 37