Sharp XEA102 - Cash Register Instruction Manual Page 28

  • Download
  • Add to my manuals
  • Print
  • Page
    / 32
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 27
26
Maintenance
The display shows symbols that do not
make sense.
The display will not illuminate even
when the mode switch is not set to “ ”.
The machine fails to operate when any
key is pressed.
The display is illuminated, but the
machine does not accept key entries.
• Journal paper does not feed properly in
the printer.
• Printing is faded or illegible.
• Was the machine reset in the proper way shown on
page 5?
• Is the power supplied to the electrical outlet? (Plug
in another electrical device.)
• Is the power cord firmly connected to the electrical
outlet?
• Is the mode switch properly set to the REG
position?
• Was the machine reset in the proper way shown on
page 5?
• Is the take-up spool installed properly?
• Is there a paper jam?
• Isn’t the ink roller used up?
• Is the ink roller installed properly?
Specifications
Problem Item to check
Model: XE-A102
Size: 330(W) x 363(D) x 234(H) millimeters
Weight: 5 kg
Power Source: Official (nominal) voltage and frequency
Power Consumption: Stand-by: 6.4 W Operating: 13 W
Work Temperature: 0 to 40 °C
Display: LED (Light-Emitting Diode) numeric display
Printer: 1 station print wheel selective type
Printing Capacity: Max. 13 digits
Paper Roll: Width: 57.5 mm ± 0.5 mm
Max. diameter: 80 mm
Paper quality: Bond paper
(thickness: 0.06 to 0.085 mm, weight: 47 to 64 g/m
2
)
Cash Drawer: 3 slots for bills, 6 for coins
Accessories (supplied):Paper roll 1 roll
Mode key 2
Drawer lock key 2
Instruction manual 1 copy (this manual)
Quick start guide 1 copy
Ink roller 1 (already installed)
Take-up spool 1
Fixing angle blacket 1
Paper holding plate 1
* Specifications and appearance are subject to change without notice.
If you encounter a problem, use this chart before calling for service.
Before Calling for Service
Page view 27
1 2 ... 23 24 25 26 27 28 29 30 31 32

Comments to this Manuals

No comments