Sharp PN-S525 Instruction Manual download pdf (Page 18)

DPMS: Display Power Management Signaling

DPMS Screen

Power

consumption

Hsync Vsync

ON STATE Display 275W Yes Yes

STANDBY

display

12W*

No Yes

SUSPEND Yes No

OFF STATE No No

Specications

Product Specications

Model PN-S525

LCD element 52" wide (132.2 cm diagonal) ASV low-reflection black TFT LCD

Max. resolution (pixels) 1920 x 1080

Max. colors 16.77 M colors (8 bits/color)

Pixel pitch 0.600 mm (H) x 0.600 mm (V)

Viewing angle 176° right/left/up/down (contrast ratio ≥ 10)

Screen active area inch (mm) 45-3/8 x 25-1/2 (1152.0 x 648.0)

Computer input signal Digital (DVI 1.0 standard-compliant), Analog RGB (0.7 Vp-p) [75 Ω]

Sync signal Horizontal/vertical separate (TTL: positive/negative), Sync-on-green,

Composite sync (TTL: positive/negative)

Video color system PAL, PAL-60, SECAM, NTSC (3.58 MHz), NTSC (4.43 MHz)

Plug and play VESA DDC2B

Power management VESA DPMS, DVI DMPM

Input terminals PC/AV Digital DVI-D 24 pin (HDCP compatible) x 1

HDMI x 1

PC Analog Mini D-sub 15 pin, 3 rows x 1

BNC

*1*2

x 1

Audio 3.5 mm mini stereo jack x 1

AV Composite video BNC x 1

S-video x 1

Component BNC (Y, Cb/Pb, Cr/Pr)

x 1

Audio RCA pin (L/R) x 1

Serial (RS-232C) D-sub 9 pin x 1

Output terminals PC/AV Digital DVI-D 24 pin x 1

Audio RCA pin (L/R) x 1

Serial (RS-232C) D-sub 9 pin x 1

Speaker 7 W + 7 W [6 Ω]

LAN terminal 10 BASE-T/100 BASE-TX

Power requirement AC 100 V - 240 V, 50/60 Hz

Operating temperature 32°F to 104°F (0°C to 40°C)

Operating humidity 20% to 80% (no condensation)

Power consumption 275 W (Input signal waiting mode: 12 W

, Standby mode: 2.0 W

)

Dimensions inch (mm) Approx. 49-3/8 x 5-7/8 x 29-3/16 (1,254 x 149 x 742) (excluding protrusions)

Weight lbs. (kg) Approx. 86.0 (39) (excluding the temporary stand)

*1 Cannot be used simultaneously.

*2 Does not support plug and play.

*3 WhenAUTOINPUTCHANGEissettoOFF.

*4 WhenSTANDBYMODEissettoLOWPOWER,LANandSCHEDULEarenotused.WhenSTANDBYMODEissettoSTANDARD,12W.

Asapartofourpolicyofcontinuousimprovement,SHARPreservestherighttomakedesignandspecicationchangesforproductimprovement

withoutpriornotice.Theperformancespecicationguresindicatedarenominalvaluesofproductionunits.Theremaybesomedeviationsfrom

these values in individual units.

Power management

ThismonitorconformstoVESADPMSandDVIDMPM.Bothyourvideocardandcomputermustsupportthesamestandardin

order for the monitor’s power management function to work.

DMPM: Digital Monitor Power Management

DMPM Screen

Power

consumption

Monitor ON Display 275W

Active OFF No display 12W*

* WhenAUTOINPUTCHANGEissettoOFF.

1 2 ... 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments

Sharp PN-S525 Instruction Manual Page 18

Comments to this Manuals

Related products and manuals for TVs & monitors Sharp PN-S525