Sharp PN-S525 Instruction Manual download pdf (Page 12)

Connecting Peripheral Equipment

Caution

• Besuretoturnoffthemainpowerswitchanddisconnect

the plug from the power outlet before connecting/

disconnecting cables. Also, read the manual of the

equipment to be connected.

• Becarefulnottomixuptheinputterminalwiththeoutput

terminal when connecting cables. Mixing up the input and

output terminals may cause malfunctions and the other

problems.

Connection with a PC

Video input

PC1 input terminal PC2 input terminal

RGB

PC3 input terminal PC4 input terminals

Audio input

PC audio input terminal

• Useacommerciallyavailablesignalcable(DVI-D24pin)

for the PC1 input terminal. Set DVI SELECT of INPUT

SELECT on the OPTION menu to PC1 DVI-D when using

the PC1 input terminal. (See Operation guide.)

• UseacommerciallyavailableHDMIcable(conformingto

the HDMI standard) for the PC2 input terminal. Set HDMI

SELECT of INPUT SELECT on the OPTION menu to PC2

HDMI when using the PC2 input terminal. In addition,

select the audio input terminal to be used in HDMI AUDIO

SELECT of INPUT SELECT on the OPTION menu. (See

Operationguide.)WhenDIGITALisselected,connectionto

the PC audio input terminal is unnecessary.

• Useacommerciallyavailablesignalcable(MiniD-sub

15 pin) for the PC3 input terminal.

• Useacommerciallyavailablesignalcable(BNC)forthe

PC4inputterminals.SetBNCSELECTofINPUTSELECT

ontheOPTIONmenutoPC4RGBwhenusingthePC4

input terminals. (See Operation guide.)

• Useacommerciallyavailableaudiocable(ministereojack)

for the PC audio input terminal. Use an audio cable without

resistance.

TIPS

• Imagesmaynotbedisplayedproperlydependingonthe

computer (graphics board) to be connected.

• Ascreenwith1920x1080resolutionmaynotbedisplayed

correctly on PC4. In this case, check the settings of your

computer (graphics board) to verify that input signals

conformtospecicationsofthismonitor.(Seepage17.)

• IfthereisacheckboxtodisableEDIDindisplaycontrol

panel, check it when using PC4.

• UsetheautomaticscreenadjustmentwhenaPCscreenis

displayedforthersttimeusingPC3orPC4,orwhenthe

setting of the PC is changed. (See Operation guide.)

The screen is adjusted automatically when SELF ADJUST

in the OPTION menu is set to ON. (See Operation guide.)

Connection with AV equipment

Video input

Cr/PrYCb/Pb

AV1 input

terminal

AV2 input

terminal

AV3 input

terminals

AV4 input terminal AV5 input terminal

Audio input

AV audio input terminals

• Useacommerciallyavailablesignalcable(DVI-D24pin)

for the AV1 input terminal. Set DVI SELECT of INPUT

SELECT on the OPTION menu to AV1 DVI-D when using

the AV1 input terminal. (See Operation guide.)

• UseacommerciallyavailableHDMIcable(conformingto

the HDMI standard) for the AV2 input terminal. Set HDMI

SELECT of INPUT SELECT on the OPTION menu to

AV2 HDMI when using the AV2 input terminal. In addition,

select the audio input terminal to be used in HDMI AUDIO

SELECT of INPUT SELECT on the OPTION menu. (See

Operationguide.)WhenDIGITALisselected,connectionto

the AV audio input terminal is unnecessary.

• Useacommerciallyavailablecomponentcable(BNC)

fortheAV3inputterminals.SetBNCSELECTofINPUT

SELECT on the OPTION menu to AV3 COMPONENT when

using the AV3 input terminals. (See Operation guide.)

• UseacommerciallyavailableS-videocablefortheAV4

input terminal.

• Useacommerciallyavailablevideocable(BNC)forthe

AV5 input terminal.

• Useacommerciallyavailableaudiocable(RCA)fortheAV

audio input terminals.

• TheAV1/AV2inputterminalsarecompatiblewiththevideo

signals below:

1920 x 1080 p @ 50/59.94/60 Hz

1920 x 1080 i @ 50/59.94/60 Hz

1280 x 720 p @ 50/59.94/60 Hz

720 x 576 p @ 50 Hz

720 x 480 p @ 59.94/60 Hz

640 x 480 p @ 59.94/60 Hz

• TheAV2inputterminalisalsocompatiblewiththevideo

signals below:

1920 x 1080p @ 24Hz

720(1440) x 576i @ 50Hz

720(1440) x 480i @ 59.94/60Hz

• TheAV3inputterminalsarecompatiblewiththevideo

signals below:

1080p @50/60Hz, 1080i @50/60Hz, 720p @50/60Hz,

576p @50Hz, 576i @50Hz, 480p @60Hz, 480i @60Hz

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments

Sharp PN-S525 Instruction Manual Page 12

Comments to this Manuals

Related products and manuals for TVs & monitors Sharp PN-S525