Sharp LL-T2010 User's Guide download pdf (Page 78)

- Lithium ion Battery

Low Battery State

When the battery is running low, a low battery notification message will appear. If you do not respond to

the low battery message, the batteries will continue to discharge until they are too low to operate. When

this happens, your notebook will go into Standby mode. There is no guarantee that your data will be saved

once the notebook reaches this point.

Dead Battery Suspend mode shows on the Status indicator just like the normal Standby mode. Once your

notebook goes into Dead Battery Suspend mode you will be unable to resume operation until you provide

a source of power either from an adapter, or a charged battery. Once you have provided power, you will

need to press the Power/Suspend/Resume button to resume operation.

In the Dead Battery Suspend mode, your data can be maintained for some time, but if a power source is

not provided promptly, the Power indicator will stop flashing and go out, meaning that you have lost the

data that was not stored. Once you provide power, you can continue to use your notebook while an adapter

is charging the battery.

USING HEAVY CURRENT DEVICES OR FREQUENT EXTERNAL OPTICAL DRIVE ACCESSES MAY PREVENT

CHARGING COMPLETELY.

■

ONCE THE LOW BATTERY NOTIFICATION MESSAGE APPEARS, YOU NEED TO SAVE ALL YOUR ACTIVE DATA AND

PUT YOUR LIFEBOOK NOTEBOOK INTO STANDBY MODE UNTIL YOU CAN PROVIDE A NEW POWER SOURCE. YOU

SHOULD PROVIDE A CHARGED BATTERY, AN AC POWER ADAPTER, OR AUTO/AIRLINE ADAPTER AS SOON AS

POSSIBLE.

■

WHEN YOU ARE IN STANDBY MODE THERE MUST ALWAYS BE AT LEAST ONE POWER SOURCE ACTIVE. IF YOU

REMOVE ALL POWER SOURCES WHILE YOUR LIFEBOOK NOTEBOOK IS IN STANDBY MODE, ANY DATA THAT HAS

NOT BEEN SAVED TO THE HARD DRIVE WILL BE LOST.

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 197 198

No comments

Sharp LL-T2010 User's Guide Page 78