26
LC-30HV4U
LC-30HV4D
Item Adjusting conditions/points Adjusting procedure
4 MAIN N358 TINT Page: 3 Adjust "MAIN N358 TINT" so that the bottom edges
Adjustment Location: Pin (3) of P801 of the waveform at pin (3) of P801 are in line with
each other as shown below.
5 MAIN N358 Cr GAIN Page: 3 Adjust "MAIN N358 CR GAIN" so that the width
Adjustment Location: Pin (5) of P801 shown below is 0.525 ± 0.01 Vp-p at pin (5) of P801.
6 MAIN N358 Page: 3 Adjust "MAIN CONTRAST 15K" so that the
CONTRAST Adjustment Location: Pin (7) of P801 difference between black and while peaks is
0.95 ± 0.02 V at pin (7) of P801.
7 Two-screen setting Press the TWIN PICT- Make the adjustment-purpose special two-screen
N358 Cr GAIN URE key. setting.
(The same images should appear on the main and
sub screens.)
8 SUB N358 Y Page: 4 Adjust "SUB N358 Y CONTRAST" so that the
CONTRAST Adjustment Location: Pin (9) of P801 difference between the black and white peaks is
1.5 ± 0.02 Vp-p at pin (9) of P801.
9 SUB N358 COLOR Page: 4 Adjust "SUB N358 COLOR GAIN" so that the black
GAIN Adjustment Location: Pin (11) of P801 peak is 1.125 ± 0.01 Vp-p at pin (11) of P801.
1.5Vp-p
10 SUB N358 TINT Page: 4 Adjust "SUB N358 TINT" so that the bottom edges
Adjustment Location: Pin (11) of P801 of the waveform at pin (11) of P801 are in line with
each other as shown below.
Comments to this Manuals