Sharp 14A2-RU Operations Instructions download pdf (Page 11)

f) Keep cutting tools sharp and clean. Properly maintained

cutting tools with sharp cutting edges are less likely to bind

and are easier to control.

g) Use the power tool, accessories and tool bits etc. in

accordance with these instructions, taking into account

the working conditions and the work to be performed. Use

of the power tool for operations different from those intended

could result in a hazardous situation.

5.1.5 Battery tool use and care

a) Recharge only with the charger specified by the manufac-

turer. A charger that is suitable for one type of battery pack

may create a risk of fire when used with another battery pack.

b) Use power tools only with specifically designated battery

packs. Use of any other battery packs may create a risk of

injury and fire.

c) When battery pack is not in use, keep it away from other

metal objects, like paper clips, coins, keys, nails, screws

or other small metal objects, that can make a connection

from one terminal to another. Shorting the battery terminals

together may cause burns or a fire.

d) Under abusive conditions, liquid may be ejected from the

battery; avoid contact. If contact accidentally occurs,

flush with water. If liquid contacts eyes, additionally seek

medical help. Liquid ejected from the battery may cause

irritation or burns.

5.1.6 Service

a) Have your power tool serviced by a qualified repair person

using only identical replacement parts. This will ensure that

the safety of the power tool is maintained.

5.2 Drill safety warnings

a) Wear ear protectors when impact drilling. Exposure to noise

can cause hearing loss.

b) Use auxiliary handle(s), if supplied with the tool. Loss of

control can cause personal injury.

c) Hold power tool by insulated gripping surfaces, when

performing an operation where the cutting accessory may

contact hidden wiring. Cutting accessory contacting a "live"

wire may make exposed metal parts of the power tool "live"

and could give the operator an electric shock.

5.3 Additional safety precautions

5.3.1 Personal safety

a) Hold power tool by insulated gripping surfaces, when

performing an operation where the fastener may contact

hidden wiring. Fasteners contacting a "live" wire may make

exposed metal parts of the power tool "live" and could give

the operator an electric shock.

b) Always hold the power tool securely with both hands on

the grips provided. Keep the grips dry, clean and free from

oil and grease.

c) Improve the blood circulation in your fingers by relaxing

your hands and exercising your fingers during breaks

between working.

d) Avoid touching rotating parts. Switch the power tool

on only after bringing it into position at the workpiece.

Touching rotating parts, especially rotating insert tools, may

lead to injury.

e) Activate the safety lock (forward / reverse switch in the

middle position) before storing or transporting the power

tool.

f) The power tool is not intended for use by children, by debil-

itated persons or those who have received no instruction

or training.

g) Children must be instructed not to play with the power tool.

h) Dust from material such as paint containing lead, some wood

species, minerals and metal may be harmful. Contact with

or inhalation of the dust may cause allergic reactions and/or

respiratory diseases to the operator or bystanders. Certain

kinds of dust are classified as carcinogenic such as oak and

beech dust especially in conjunction with additives for wood

conditioning (chromate, wood preservative). Material contain-

ing asbestos must only be treated by specialists. Where the

use of a dust extraction device is possible it shall be used.

Printed: 05.09.2013 | Doc-Nr: PUB / 5071565 / 000 / 01

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 17 18 19

Comments to this Manuals

No comments

Sharp 14A2-RU Operations Instructions Page 11

Comments to this Manuals

Related products and manuals for TVs & monitors Sharp 14A2-RU