Sharp 14A2-RU Operations Instructions download pdf (Page 12)

To achieve a high level of dust collection, use a suitable

vacuum cleaner of the type recommended by Hilti for wood

dust and/or mineral dust together with this tool. Ensure

that the workplace is well ventilated. The use of a dust

mask of filter class P2 is recommended. Follow national

requirements for the materials you want to work with.

5.3.2 Power tool use and care

a) Secure the workpiece. Use clamps or a vice to secure the

workpiece. The workpiece is thus held more securely than by

hand and both hands remain free to operate the power tool.

b) Check that the insert tools used are compatible with the

chuck system and that they are secured in the chuck

correctly.

c) Large and heavy insert tools must only be operated in first

gear. There is otherwise a risk that the tool will be damaged

when it is switched off or, under unfavorable conditions, the

chuck might be detached.

5.3.3 Cordless tool use and care

a) Ensure the switch is in the off position before inserting

battery pack. Inserting the battery pack into power tools that

have the switch on invites accidents.

b) Do not expose batteries to high temperatures or fire. This

presents a risk of explosion.

c) Do not disassemble, squash or incinerate batteries and do

not subject them to temperatures over 80°C. A risk of fire,

explosion or injury through contact with caustic substances

may otherwise result.

d) Avoid ingress of dampness.Dampness may cause a short

circuit resulting in a risk of burning injury or fire.

e) Do not use batteries other than those approved for use

with the applicable power tool or appliance. Use of other

batteries or use of the battery for purposes for which it is not

intended presents a risk of fire and explosion.

f) Observe the special instructions applicable to the trans-

port, storage and use of Li-ion batteries.

g) Remove the battery before storing or transporting the

power tool.

h) Avoid short-circuiting the battery. Check that the terminals

on the battery and in the power tool are free from foreign

objects before inserting the battery in the power tool. Short

circuiting the battery terminals presents a risk of fire, explosion

and chemical burns.

i) Do not charge or continue to use damaged batteries (e.g.

batteries with cracks, broken parts, bent or pushed-in

and/or pulled-out contacts).

j) If the battery gets too hot to touch, this may indicate that it

is faulty. Place the tool in a location where it can be kept

under observation, well away from flammable materials,

and allow it to cool down. Contact Hilti Service after the

battery has been allowed to cool.

5.3.4 Electrical safety

Before beginning work, check the working area (e.g. using a

metal detector) to ensure that no concealed electric cables or

gas and water pipes are present. External metal parts of the

power tool may become live, for example, when an electric cable

is damaged accidentally. This presents a serious risk of electric

shock.

5.3.5 Work area safety

a) Ensure that the workplace is well lit.

b) Ensure that the workplace is well ventilated. Exposure to

dust at a poorly ventilated workplace may result in damage to

the health.

Printed: 05.09.2013 | Doc-Nr: PUB / 5071565 / 000 / 01

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19

Comments to this Manuals

No comments

Sharp 14A2-RU Operations Instructions Page 12

Comments to this Manuals

Related products and manuals for TVs & monitors Sharp 14A2-RU