Sharp CV-13NH User Manual download pdf (Page 29)

ENGLISH

CLEANING THE UNIT AND THE REMOTE CONTROL

Wipe them with a soft, dry cloth or with a cloth moistened with a mild soap. Carefully remove

any residue by wiping with a damp cloth and dry completely.

Avoid splashing water onto the unit. Water can dangerously damage the electrical insulation.

Never use harsh chemicals or abrasive cleaners on any part of the unit. To avoid damaging

the unit, do not use hot water (120°F/50°C or hotter) when cleaning.

Perform drainage to drain out water within the unit. (See Page 26 "When the unit is not

used for a long time").

Operate the unit in the FAN or VENTILATION mode for about half a day to thoroughy

dry inside the unit.

Clean the ﬁ lters, then reinstall them.

MAINTENANCE

CLEANING THE INSECT GUARD NET

The cooling performance may be reduced or stop

completely if the insect guard net becomes clogged

with dust.

Periodically remove the window exhaust adapter from

the window panel and clean the insect guard net with

a vacuum cleaner.

Filters

E-27

Be sure to disconnect the power from the wall socket before performing any main-

tenance.

CLEANING THE FILTERS

If the ﬁ lter is clogged with dust, the airﬂ ow will be reduced, resulting in poor cooling perform-

ance. The ﬁ lter should be cleaned every two weeks.

REMOVE THE FILTERS

• Gently pull the ﬁ lter handle to the right and slide

the ﬁ lter out of the unit.

CLEAN THE FILTERS

• Use a vacuum cleaner to remove any dust. If

the ﬁ lters are very dirty, wash them with deter-

gent and rinse carefully with clean water. Dry

the ﬁ lters in the shade before reinstalling them.

REINSTALL THE FILTERS

• Hold the ﬁ lter handle and gently push the ﬁ lter

back into place.

Never operate the unit without the ﬁ lter. Doing

so may result in serious damage to the unit.

MAINTENANCE AFTER AIR CONDITIONER SEASON

Insect guard net

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 59 60

No comments

Sharp CV-13NH User Manual Page 29