Sharp CV-13NH User Manual download pdf (Page 22)

FAN MODE

VENTILATION MODE

E-20

Install the exhaust hose (See Page14), turn the drainage nozzle to the CLOSE

position, and check the drainage nozzle is covered with the stopcock.

Install the exhaust hose (See Page 14), turn the drainage nozzle to the CLOSE

position, and check the drainage nozzle is covered with the stopcock.

In this mode, the air conditioner simply circulates the air without cooling it.

In this mode, the air conditioner ventilates the air to outdoors.

Ensure that the stopcock is securely inserted into the lower drainpipe nozzle and

that the nozzle has not been damaged.

Ensure that the stopcock is securely inserted into the lower drainpipe nozzle and

that the nozzle has not been damaged.

Press the MODE button to select FAN mode.

COOL DEHUM FAN VENT

Press the POWER button to start operation.

• The red OPERATION lamp on the unit will light.

• The temperature cannot be set.

Press the FAN button to set the desired fan

speed.

QUIET LOW HIGH

TO TURN OFF

Press the POWER button again.

• The red OPERATION lamp on the unit will turn off.

Press the MODE button to select VENT mode.

COOL DEHUM FAN VENT

Press the POWER button to start operation.

• The red OPERATION lamp on the unit will light.

• The temperature cannot be set.

Press the FAN button to set the desired fan

speed.

• Although the louvers are closed and no air blows

out into the room, the external ventilation fan

speed changes.

QUIET LOW HIGH

TO TURN OFF

Press the POWER button again.

• The red OPERATION lamp on the unit will turn off.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 59 60

No comments

Sharp CV-13NH User Manual Page 22