Sharp LC-28HM2U Operation Specifications download pdf (Page 15)

Basic Operation

Turning on POWER

When the POWER/Standby indicator is “OFF”:

Press MAIN POWER on the top panel of the display.

If the power cannot be switched on by pressing MAIN POWER, first

press MAIN POWER in the “OFF” position, then while keeping INPUT

pressed, press MAIN POWER again.

When the POWER/Standby indicator lights up “red”:

Press POWER on the remote control.

• When the power is switched on, the POWER/Standby indicator

lights up green and a mode indicator appears on the upper right

corner of the display.

CAUTION

Never pull the plug of the power cord before you switch off the power

by using the MAIN POWER button on the top panel.

Note

Unless external AV equipment is connected, the indicator “AV-1”

appears on the display.

Switching INPUT Source

Press INPUT and select the applicable input source.

Note

• The input source mode is skipped if the corresponding input terminal is not

connected with external equipment (except “PC”).

• If you change the AV INPUT 3/AV OUT select, you can select “AV-3”. See

page 29 for details.

POWER/Standby indicator

BRIGHTNESS

MAIN POWER

Top view

BRIGHTNESS

INPUT

COMPO-1

Indicator (Example)

AV-1 AV-2 COMPONENT1 COMPONENT2 PC

AV-1

Indicator (Example)

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 44 45

No comments

Sharp LC-28HM2U Operation Specifications Page 15