9
US
Preparation
Connecting the Display and AVC System
Use the supplied system cable.
1 Remove the back cover of the display.
• Press both of your thumbs upwards against
the two tabs on lower side of the cover (✩)
and pull down the cover.
2 Remove the system cable cover.
3 1 Insert the system cable connectors into the
display input terminal on the display and the
output terminal on the AVC system until they
click.
2 Connect the AC power cords to the AC
power inputs on the display and the AVC
system.
• After connecting the various cables, fasten
them using the provided cable clamps as
shown in the diagram below before mounting
the cover.
Hold this tab and slide the
cover downward.
2 Removing the system
cable cover
3-
1
3-
2
3-
2
6
3
-
1
Pass over the pins
Supplied
cable clamp
e.g. Cables from
the optional
speaker system
Rear view
Preparation
Comments to this Manuals