Sharp PN-U553 Operations Instructions download pdf (Page 17)

Turning Power On/Off

Operation mode

When the monitor is turned on for the rst time after being

shipped from the factory, the operation mode setting screen

will be displayed. Set it to MODE1 or MODE2.

MODE1 ....OFF IF NO OPERATION is set to ON, and

STANDBY MODE is set to LOW POWER. (These

settings can not be changed.)

If there is no operation for 4 hours or more, the

monitor automatically enters standby mode. Power

consumption in standby mode is also minimized.

MODE2 ....Will perform standard operation.

OFF IF NO OPERATION is set to OFF, and

STANDBY MODE is set to STANDARD. These

settings can be changed.

Even after being set, changes can be made using

OPERATION MODE, located in the menu of the monitor. (See

page 24.)

Date/time setting

• If the time has not been set, such as when the monitor

is rst turned on, set the date and time in DATE/TIME

SETTING of the SETUP menu.

Be sure to set the date and time.

TIPS

•

Set the date in “Year/Month/Day” order.

•

Set the time on a 24-hour basis.

•

The clock stops if the main power remains off for about

1 week.*

(*Approximate time. The actual time varies depending

on the state of the monitor.)

Disabling power on/off operations

Power on/power off operations can be disabled in order to

protect the monitor from an accidental power off. Set the

ADJUSTMENT LOCK in FUNCTION menu to “ON”. (See

page 29.)

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 53 54

No comments

Sharp PN-U553 Operations Instructions Page 17