Sharp XG-V10WE Specifications download pdf (Page 33)

Setup & Connections

Rear Projection

• Place a translucent screen between the projector and

the audience.

• Use the projector’s menu system to reverse the

projected image. (See page 56 for use of this

function.)

• Optimal image quality can be achieved when the projector

is positioned perpendicular to the screen with all feet flat

and level.

Projection Using a Mirror

• When the distance between the projector and screen

is not sufficient for normal rear projection, you can

use a mirror to reflect the image onto the screen.

• Place a mirror (normal flat type) in front of the lens.

• Project the normal image onto the mirror.

• The image reflected from the mirror is projected onto

the translucent screen.

CAUTION

• When using a mirror, be sure to carefully position both the

projector and the mirror so the light does not shine into the

eyes of the audience.

• It is recommended that you use the optional Sharp

ceiling-mount bracket for this installation.

• Before mounting the projector, contact your nearest

Sharp Authorised LCD Projector Dealer or Service

Centre to obtain the recommended ceiling-mount

bracket (sold separately). (AN-SV1T ceiling-mount

bracket, AN-TK201/AN-TK202 extension tube for AN-

SV1T.)

• When the projector is in the inverted position, use the

upper edge of the screen as the base line.

• Use the projector’s menu system to select the

appropriate projection mode. (See page 56 for use

of this function.)

Ceiling-mount Projection

Image Projection

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 91 92

No comments

Sharp XG-V10WE Specifications Page 33