Sharp PG-MB60X Specifications download pdf (Page 24)

-20

Projecting a Reversed Image

Projection from behind the Screen

■ Place a translucent screen between the projector and the audience.

■ Reverse the image by setting “Rear” in the “PRJ Mode” menu. (See page 57.)

Projection Using a Mirror

■ Place a mirror (normal flat type) in front of the lens.

■ When the translucent screen is placed between the mirror and audience, set to “Front” in the “PRJ Mode”

menu. (See page 57.)

■ When the mirror is placed on the audience side, set to “Rear” in the “PRJ Mode” menu. (See page

57.)

Info

• When using a mirror, ensure that both the projector and the mirror are carefully placed so the projected

light does not shine into the eyes of the audience.

Ceiling-mount Setup

■ It is recommended that you use the optional Sharp ceiling-mount

bracket for this installation.

Before mounting the projector, contact your nearest Sharp Au-

thorized Projector Dealer or Service Center to obtain the recom-

mended ceiling-mount bracket (sold separately).

• AN-MBCM10 ceiling-mount bracket, its AN-EP101B extension

tube and AN-JT200 universal bracket, adaptor for non-level

ceiling installation (for U.S.A.).

• AN-60KT ceiling-mount bracket, its AN-TK201 and AN-TK202

extension tubes (for countries other than the U.S.A.).

■ Invert the image by setting “Ceiling + Front” in “PRJ Mode”. See

page

57 for use of this function.

Setting up the Projector

Translucent screen

Audience

Set to “Front”

Audience

Translucent screen

Mirror

Set to “Rear”

Audience

Mirror

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 83 84

No comments

Sharp PG-MB60X Specifications Page 24