Sharp PG-M20X User Manual download pdf (Page 47)

Basic Operation

-43

Selecting Adjustment Settings

Adjustment settings stored in the projector

can be easily accessed.

Select “Select Setting” in the “Fine

Sync” menu ➝ For details, see page 38.

Note

• If a memory position has not been set, a

resolution and frequency setting will not

be displayed.

• When selecting a stored adjustment set-

ting with “Select Setting”, you can set the

projector in the stored adjustments.

Special Mode Settings

Ordinarily, the type of input signal is detected

and the correct resolution mode is automati-

cally selected. However, for some signals, the

optimal resolution mode in “Special Modes” on

the “Fine Sync” menu screen may need to be

selected to match the computer display mode.

Set the resolution by selecting “Special

Modes” in the “Fine Sync” menu ➝ For

details, see page 38.

Note

• Avoid displaying computer patterns which

repeat every other line (horizontal stripes).

(Flickering may occur, making the image

hard to see.)

• When a DVD player or Digital Video is

connected, select 480P as the input sig-

nal.

•

See “Checking the Input Signal” below for

information on the currently selected input

signal.

Checking the Input Signal

This function allows you to check the current

input signal information.

Select “Signal Info” in the “Fine Sync”

menu ➝ For confirmation, see page 36.

Note

• The projector will display the number of

scanned lines available input from audio-

visual equipment such as a DVD player

or Digital Video.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 85 86

Comments to this Manuals

No comments