Sharp AN-WC11B Specifications download pdf (Page 19)

Using in a Wireless

Environment

-19

3. Connecting Easily via a Wireless LAN (Quick Connection)

The following explains how to connect to the projector via a wireless LAN.

CAUTION

• When using “Quick Connection” (DHCP) in a location already configured with a

wireless network, the pre-existing network may be affected. In this case, make sure

to consult with the Network Administrator.

• When the profile has been set to “Quick Connection (from DHCP server)”, network

settings such as the IP address will be received from the projector. First start the

projector, and then the computer after “Standby” appears.

Turn the projector on, and reset the network settings on the projector.

1 On the projector, select “Reset” in the “Network” menu, and then press the

ENTER button.

2 On the confirmation message, select “Yes”, and then press the ENTER button.

3 Install the AN-WC11B Wireless LAN Card to the PC card slot (INPUT 4) on the

projector.

4 Wait until “Standby” is displayed.

For installing the wireless LAN card or menu operation, see the projector

operation manual.

Start the “Network Selector”.

For details, see “1. Starting and Exiting” on page 17.

Click the next to the “Profile” field and select “Quick Connection” from

the list.

The contents of the profile list may vary depending on your computer’s operating

environment.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 61 62

No comments

Sharp AN-WC11B Specifications Page 19