Sharp AR-BC260 User Manual download pdf (Page 110)

COLOR ADJUSTMENTS MENU

6-14

Color balance

This function is used to adjust the color, tone, and density of color copies.

Touch the [COLOR BALANCE] key on the

COLOR ADJUSTMENTS menu screen.

The COLOR BALANCE

setting screen will appear.

Use the keys indicated in the illustration

below to adjust the color balance settings.

The Color Balance setting allows you to adjust the

densities of four colors: cyan, magenta, yellow,

and black.

The density range is divided into eight levels for

each color, from 1 (lowest density areas) to 8

(highest density areas). The density can be

adjusted one level at a time or eight levels at once.

(A) Use these keys to select the color to be adjusted

(

[C]

= cyan,

[M]

= magenta, [Y] = yellow,

[Bk]

black).

If only the area around the letter inside a key is

highlighted, the settings have been changed from

the factory default settings.

(B) Use these keys to change the densities of all eight

levels at once.

When either key is touched, the indicator lines of

all eight levels will move up or down one step.

the eight density levels.

When one of the keys is touched, the

corresponding indicator line will move up or down

one step. Touch the key to increase the

density of the corresponding level, or the key

to decrease the density.

(D) Use this key to return the densities of all eight

levels to the initial settings.

The initial color balance settings are the values set

with key operator program "Initial color balance

setting" (See page 15 of the key operator's guide).

For this reason, the initial settings may not

necessarily be 0 (the middle indicator position) for

all levels. The initial setting of each level is shown

by a gray indicator.

When the color balance setting is adjusted, the

color adjustments menu icon ( ) will appear at

the upper left of the screen to indicate that the

function is turned on.

Touch the [OK] key (inside [OK] key) on

the COLOR BALANCE setting screen.

Return to the COLOR ADJUSTMENTS menu

screen.

Touch the [OK] key on the COLOR

ADJUSTMENTS menu screen.

Return to the SPECIAL MODES screen.

Touch the [OK] key on the SPECIAL

MODES screen.

Return to the main screen of copy mode.

RGB ADJUST

COLOR

BALANCE

BRI

OKCANCEL

COLOR

ADJUSTMENTS

COLOR BALANCE

Y M

BkC

12345678

ALL

(B)

(A)

About the steps that follow

If the reversing single pass feeder is being

used, see pages 5-2 through 5-6. If the

document glass is being used, see pages 5-7

through 5-9.

In either case, press the [COLOR COPY

START] key to begin copying.

To cancel the COLOR BALANCE function, select the

COLOR BALANCE function again and touch the

[CANCEL] key (step 2).

ApollonII_general-copy_SEC.book 14 ページ２００４年９月６日　月曜日　午後４時５７分

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 139 140

Comments to this Manuals

No comments

Sharp AR-BC260 User Manual Page 110

Comments to this Manuals

Related products and manuals for Printers Sharp AR-BC260