Sharp MX-2310U Service Manual

SERVICE MANUALParts marked with " " are important for maintaining the safety of the set. Be sure to replace these parts withspecified ones f

MX-3610N PRODUCT OUTLINE 1 – 3C. 23cpm/31cpm(G) machineMX-3111UMX-2310UDIGITAL FULL COLORMULTIFUNCTIONAL SYSTEMMX-DE12STAND/1x500 SHEETPAPER DRAWERM

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 245) Change the height balance of the scanner rail on the frontframe side.Remove the lower cabinet of the oper

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 25 ADJ 8 Scan image focus adjustmentThis adjustment must be performed in the following cases:* The CCD unit ha

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 2610) Loosen the CCD unit fixing screws.Never loosen the screws marked with X.If any one of these screws is lo

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 272) Select the set item L with the scroll key, and enter the valuecorresponding to the paper feed tray with A

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 28Note for the color balance/density check and adjustments• For the color balance adjustments, be sure to use

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 29a. Color copy check items (Check to confirm the following:)1) There are 12 void areas.2) Registrations (one

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 30b. Monochrome copy check items (Check to confirm the following:)1) There are 12 void areas.2) The resolution

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 31(Method 2)Use SIM46-21 to print the color balance adjustment sheet, andcheck each process (CMY) black patch

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 32(2) Adjustment procedures1) Set the SIT chart (UKOG-0280FCZZ or UKOG-0280FCZ1) tothe reference position on t

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 33• Relationship between the factory target and the service target and the color balance target for the user c

MX-3610N PRODUCT OUTLINE 1 – 4D. 26cpm/36cpm/31cpm(A) machineMX-3610NDIGITAL FULL COLORMULTIFUNCTIONAL SYSTEMMX-3110NMX-2610NDIGITAL FULL COLORMULTI

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 34It is recommended to keep the printed adjustment pattern createdwith SIM 46-21. This adjustment pattern can

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 351) Enter the SIM 63-8 mode. 2) Press [EXECUTE] key.3) Press [YES] key.The service color balance target and t

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 36• Factory target in the printer color balance adjustment (Automatic adjustment) (SIM 46-74/67-24)By use of S

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 372) Enter the SIM 67-27 mode.3) Press [SETUP] key.4) Set the color patch image (adjustment pattern) correctly

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 38b. Adjustment procedures(Auto color balance adjustment by the serviceman)Copy/printer color balance and dens

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 391) Enter the SIM46-74 mode.2) Press [EXECUTE] key.The high density process control is performed, and the cop

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 406) Set the color patch image (adjustment pattern) printed in theprocedure 5) on the document table.Set the c

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 4110) When "COMPLETED THIS PROCEDURE" is displayed, theadjustment operation is completed.Cancel SIM4

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 42b. Adjustment procedure(Auto color balance adjustment by the serviceman)YESNONOYESYESNOCopy color balance an

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 431) Enter the SIM 46-24 mode.2) Press [EXECUTE] key. (A4/11" x 8.5" or A3/11" x 17" paper

MX-3610N PRODUCT OUTLINE 1 – 52. Option listSTD: Standard equipmentOPT: Installable option*1: The printer expansion kit is required.*2: Memory expan

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 446) Check the color balance and density.(Refer to the item of the copy color balance and densitycheck.)7) Use

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 45b. Adjustment procedureYESNOYESNONOYESCopy color balance and density adjustment (Manual adjustment) procedur

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 461) Enter the SIM46-21 mode.2) Press [EXECUTE] key. (A4/11" x 8.5" or A3/11" x 17" paper

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 47(Normal end (Auto transition))(Abnormal end (Auto transition))After completion of the operation, the simulat

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 48 10-D Copy / Image send / FAX image quality adjustment (Individual adjustment)a. GeneralThis adjustment is u

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 49*1: Text Printed Photo / Copy document, Text Printed Photo only*2: Printer RGB save  FAX resend only*3: Pri

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 50 10-D (1)Color copy density adjustment (for each color copy mode) (separately for the low-density area and t

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 513) Enter the adjustment value with 10-key and press [OK] key.When adjusting the copy density on the low dens

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 521) Enter the SIM 46-10 mode. 2) Select the copy mode to be adjusted with the mode key.3) Select a color to c

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 531) Enter the SIM 46-16 mode.2) Select the density level (point) to be adjusted with the scrollkey.3) Enter t

MX-3610N CONSUMABLE PARTS 2 – 1MX-3610NService Manual [2] CONSUMABLE PARTS1. Supply system tableA. 18cpm machine(1) Europe(2) Asia, Hong Kong(3) Mid

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 54PRESCAN: Once the densities on the document surface are scanned, the out-put image density is determined acc

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 55 10-D (7)Copy/Scan low density image density adjustment (for each mode) (No need to adjust normally)This adj

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 562) Select the mode to be adjusted with the scroll key.*1: 20cpm machine: Disable without HDD.3) Enter the ad

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 57 10-D (9)Monochrome (Copy/Scan/FAX) mode color document reproduction adjustment (No need to adjust normally)

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 582) Select the AUTO MODE or the MANUAL MODE with the modekey.3) Select the mode to be adjusted with the scrol

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 591) Enter the SIM 46-60 mode.2) Select the mode to be adjusted with the scroll key.3) Input numeric value cor

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 60 10-D (12)Copy high density image density reproduction setting (Normally unnecessary to the setting change)I

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 61 10-D (13)Copy color balance adjustment (Single color copy mode) (No need to adjust normally)This adjustment

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 623) Enter the adjustment value with 10-key.In case of increase of image density, input large numericvalue. Or

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 63 10-D (16)Copy gamma, color balance adjustment for each dither (Automatic adjustment)a. GeneralThis simulati

MX-3610N CONSUMABLE PARTS 2 – 2(4) TaiwanB. 23cpm machine(1) North America, Middle America, South America (Except Brazil)C. 31cpm(G) machine(1) Nort

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 64 10-D (17) Dropout color adjustment (Normally not required.)(26cpm/36cpm/31cpm(A) machine)General (Purpose):

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 65 10-D (18) Watermark adjustment (Normally not required) (26cpm/36cpm/31cpm(A) machine)General (Purpose):This

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 66Changing adjustment values of adjustment items A - I andtrade off3) Enter the adjustment value with 10-key a

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 67Watermark adjustment in the system settingSystem setting  Security setting  Watermark print  Contrast tab

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 68b. Adjustment procedure(Auto color balance adjustment by the serviceman)YESNOIs the PCL printerfunction prov

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 691) Enter the SIM 67-24 mode.2) Press [EXECUTE] key. (A4/11" x 8.5" or A3/11" x 17" paper

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 706) Check the color balance and density.(Refer to the item of the printer color balance and densitycheck.)Whe

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 711) Enter the SIM 67-25 mode.2) Press [EXECUTE] key. (A4/11" x 8.5" or A3/11" x 17" paper

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 726) Check the color balance and density.(Refer to the item of the printer color balance and densitycheck.)If

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 73* If a tone gap occurs on part of high density, set 0 to item A and BThe density of high density part decrea

MX-3610N CONSUMABLE PARTS 2 – 3D. 20cpm/23cpm/31cpm(G) machine(1) Europe, Eastern Europe, Russia, Australia, New Zealand(2) Asia, Hong KongToner car

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 74 10-F (4)Automatic color balance adjustment by the user (Printer color balance automatic adjustment ENABLE s

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 751) Enter the SIM 40-2 mode. 2) Open the manual paper feed guide to the maximum width posi-tion.3) Press [EXE

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 76 11-B RSPF paper feed tray document size (width) sensor adjustmentThis adjustment must be performed in the f

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 77 12-B Adjust the sensitivity of the original size sensor1) Enter the SIM41-2 mode.2) Execute the sensor adju

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 78 ADJ 15 Print image position, image magnification ratio, void area, off-center adjustment (Print engine) (Ma

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 791) Enter the SIM 50-10 mode.2) Set A4 (11 x 8.5") paper to all the paper feed trays. Select anadjustmen

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 80That is, adjustment value of item (DENB-XXX) fine adjusts toadjustment item (DENB) for each paper tray.After

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 817) Loosen the paper feed tray off-center adjustment screws (2pcs.) at the center section of the lift plate o

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 82 16-B Scan image magnification ratio adjustment (sub scanning direction) (Manual adjustment) (Document table

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 83 16-C Scan image magnification ratio adjustment (main scanning direction) (Manual adjustment) (RSPF mode)Thi

MX-3610N CONSUMABLE PARTS 2 – 4(3) Middle East, Africa(4) TaiwanE. 26cpm/31cpm(A) machine(1) North America, Middle America, South America (Except Br

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 842) Make a duplex copy at the normal ratio on A4 paper.3) Measure the images on the copy paper and the origin

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 853) Enter the SIM 50-12 mode.4) Select the adjustment mode OC with the scroll key.5) Enter the adjustment val

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 86SIM50-6* Item A, B: When the adjustment value is increased, the scantiming is delayed.* Item C - H: When the

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 872) Enter the SIM 50-1 mode.3) Set RRCA, LEAD, and SIDE to the default values.4) Perform the image lead edge

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 88 18-B Image scanning position adjustment (Manual adjustment) (RSPF mode)This adjustment must be performed in

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 89* Item A, B: When the adjustment value is increased, the scan timing is delayed.* Item C - H: When the adjus

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 902) Enter the adjustment value of TRAIL EDGE (SIDE1/SIDE2)with 10-key, and press [OK] key.TRAIL EDGE (SIDE 1)

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 912) Select an adjustment target item with the scroll key.Saddle stitch finisherItem/Display ContentSetting ra

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 92C FRONT ADJUSTAlignment position adjustment (front)35 - 65 50 When the paper alignment capability in the sta

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 933) Enter an adjustment value and press [OK] key.4) Cancel the simulation, make a copy in the mode including

MX-3610N CONSUMABLE PARTS 2 – 5(2) Europe, Eastern Europe, Russia, Australia, New Zealand(3) Asia, Hong Kong(4) Middle East, Taiwan, AfricaDrum OPC

MX-3610N SIMULATION 5 – 1MX-3610NService Manual [5] SIMULATION1. General and purposeThe simulation mode has the following functions, to display them

MX-3610N SIMULATION 5 – 218cpm/20cpm/23cpm/31cpm(G) machineYESNONOYESYESYESNONONOYESNOYESYESNONOYESYESNOStandby for entry of SIMsub codeEnter SIM su

MX-3610N SIMULATION 5 – 326cpm/36cpm/31cpm(A) machineYESNONOYESYESYESNONONOYESNOYESYESNONOYESYESNOStandby for entry of SIMsub codeEnter SIM sub code

MX-3610N SIMULATION 5 – 43. List of simulation codesMain Sub Functions Section1 1 Used to check the operation of the scanner (reading) unit and the

MX-3610N SIMULATION 5 – 522 18 Used to display the user data delete history.19 Used to check the values of the counters related to the scan - image

MX-3610N SIMULATION 5 – 627 1 Used to set non-detection of communication error (U7-00) with RIC. (FSS function)2 Used to set the sender's regis

MX-3610N SIMULATION 5 – 746 1 Used to adjust the copy density in the copy mode.2 Used to adjust the copy density in the copy mode.4 Used to adjust t

MX-3610N SIMULATION 5 – 850 1 Copy image position, image loss adjustment2 Used to adjust the copy image position and the image loss. (This simulatio

MX-3610N SIMULATION 5 – 965 1 Used to adjust the touch panel (LCD display section) detection coordinates. Operation panel section2 Used to display t

MX-3610N SIMULATION 5 – 104. Details of simulation 1 1-1PurposeOperation test/checkFunction (Purpose)Used to check the operation of the scanner(read

MX-3610N CONSUMABLE PARTS 2 – 6F. 36cpm machine(1) North America, Middle America, South America (Except Brazil)(2) Europe, Eastern Europe, Russia, A

MX-3610N SIMULATION 5 – 11 2-3PurposeOperation test/checkFunction (Purpose)Used to check the operations of the loadsin the automatic document feeder

MX-3610N SIMULATION 5 – 12 3-3PurposeOperation test/checkFunction (Purpose)Used to check the operation of the load inthe finisher and the control ci

MX-3610N SIMULATION 5 – 13Saddle stitch finisher (MX-FN10)E STAPLE BOTHStapling position adjustment (center position of two positions binding)68 - 1

MX-3610N SIMULATION 5 – 14F STAPLE REAR RStapling position adjustment (Rear, one position /R series)45 - 75 50 When the stapling position on the R s

MX-3610N SIMULATION 5 – 15 4 4-2PurposeOperation test/checkFunction (Purpose)Used to check the operations of the sen-sors and detectors in the desk/

MX-3610N SIMULATION 5 – 16 5-2PurposeOperation test/checkFunction (Purpose)Used to check the operation of the heaterlamp and the control circuit.Sec

MX-3610N SIMULATION 5 – 17 6-2PurposeOperation test/checkFunction (Purpose)Used to check the operations of each fanmotor and its control circuit.Sec

MX-3610N SIMULATION 5 – 18 7-6PurposeSettingFunction (Purpose)Used to set the operating intermittent agingcycle.SectionOperation/Procedure1) Enter t

MX-3610N SIMULATION 5 – 19 8-2PurposeOperation test/check/adjustmentFunction (Purpose)Used to check and adjust the operation ofthe main charger grid

MX-3610N SIMULATION 5 – 20Item/Display ContentSetting range18cpm/20cpm/23cpm machine26cpm/31cpm machine36cpm machineDefault valueActual output value

MX-3610N CONSUMABLE PARTS 2 – 7(4) Middle East, Taiwan, Africa2. Maintenance parts listA. 18cpm machine(1) Europe, TaiwanToner cartridge (Yellow)Ton

MX-3610N SIMULATION 5 – 21 9 9-2PurposeOperation test/checkFunction (Purpose)Used to check the operations of the sen-sors and detectors in the paper

MX-3610N SIMULATION 5 – 22 16 16--PurposeClear/Cancel (Trouble etc.)Function (Purpose)Used to cancel the self-diag "U2" trouble.SectionMFP

CONTENTSNOTE FOR SERVICING1. Precautions for servicing . . . . . . . . . . . . . . . . . . . . . . . . . i2. Warning for servicing . . . . . . . . . .

MX-3610N CONSUMABLE PARTS 2 – 8When shipping, the parts are packed in the unit of 10 sets. In the market, however, they are treated in the unit of 1

MX-3610N CONSUMABLE PARTS 2 – 9When shipping, the parts are packed in the unit of 10 sets. In the market, however, they are treated in the unit of 1

MX-3610N CONSUMABLE PARTS 2 – 10The numbers in the column of "Quantity in collective package" in the above list indicate the quantities fo

MX-3610N CONSUMABLE PARTS 2 – 11When shipping, the parts are packed in the unit of 10 sets. In the market, however, they are treated in the unit of

MX-3610N CONSUMABLE PARTS 2 – 12When shipping, the parts are packed in the unit of 10 sets. In the market, however, they are treated in the unit of

MX-3610N CONSUMABLE PARTS 2 – 13When shipping, the parts are packed in the unit of 10 sets. In the market, however, they are treated in the unit of

MX-3610N CONSUMABLE PARTS 2 – 14(4) Hong KongWhen shipping, the parts are packed in the unit of 10 sets. In the market, however, they are treated in

MX-3610N CONSUMABLE PARTS 2 – 15When shipping, the parts are packed in the unit of 10 sets. In the market, however, they are treated in the unit of

MX-3610N CONSUMABLE PARTS 2 – 16When shipping, the parts are packed in the unit of 10 sets. In the market, however, they are treated in the unit of

MX-3610N CONSUMABLE PARTS 2 – 17F. 36cpm machine(1) North America, Middle America, South AmericaWhen shipping, the parts are packed in the unit of 1

Symbols in this manualThe lists of symbols used in this manual are shown below.The meaning of each symbol described in the table must be understood fo

MX-3610N CONSUMABLE PARTS 2 – 18When shipping, the parts are packed in the unit of 10 sets. In the market, however, they are treated in the unit of

MX-3610N CONSUMABLE PARTS 2 – 19When shipping, the parts are packed in the unit of 10 sets. In the market, however, they are treated in the unit of

MX-3610N CONSUMABLE PARTS 2 – 20C. 23cpm machineD. 26cpm machineE. 31cpm machineF. 36cpm machineDeveloper/drum counter Developer/drum rpmB/W Full co

MX-3610N CONSUMABLE PARTS 2 – 214. Production number identificationA. OPC drumThe lot number is comprised of 10 digits. Each digit indicates thecont

MX-3610N EXTERNAL VIEW AND INTERNAL STRUCTURE 3 – 1MX-3610NService Manual [3] EXTERNAL VIEW AND INTERNAL STRUCTURE1. External viewA. 18cpm/20cpm/23c

MX-3610N EXTERNAL VIEW AND INTERNAL STRUCTURE 3 – 2B. 26cpm/36cpm/31cpm(A) machine* Peripheral device.No. Name Function/Operation1 Reversing single

MX-3610N EXTERNAL VIEW AND INTERNAL STRUCTURE 3 – 3C. Automatic document feeder and document glassNo. Name Function/Operation1 Paper feed roller Thi

MX-3610N EXTERNAL VIEW AND INTERNAL STRUCTURE 3 – 42. Internal structureNo. Name Function/Operation Note1 Toner cartridges These contain toner for p

MX-3610N EXTERNAL VIEW AND INTERNAL STRUCTURE 3 – 53. I/F connectorsNo. Name Function/Operation1 USB connector (A type) Supports USB 2.0 (Hi-Speed).

MX-3610N EXTERNAL VIEW AND INTERNAL STRUCTURE 3 – 64. Operation panelA. 18cpm/20cpm/23cpm/31cpm(G) machineNo. Name Function/Operation1 Touch panel M

3. Symbols used for kinds of parts4. Symbols used for additional descriptionsCleaning (Vacuum)Indicates that cleaning is performed with a vacuum clean

MX-3610N EXTERNAL VIEW AND INTERNAL STRUCTURE 3 – 7B. 26cpm/36cpm/31cpm(A) machineNo. Name Function/Operation1 Touch panel Messages and keys appear

MX-3610N EXTERNAL VIEW AND INTERNAL STRUCTURE 3 – 85. Sensors and detectorsA. 18cpm/20cpm/23cpm/26cpm/31cpm machine(1) 18cpm/20cpm machineSPEDSPWSSO

MX-3610N EXTERNAL VIEW AND INTERNAL STRUCTURE 3 – 9(2) 23cpm/26cpm/31cpm machineSignal name Name Type Function/Operation Note1TUD_CL Transfer mode d

MX-3610N EXTERNAL VIEW AND INTERNAL STRUCTURE 3 – 10CSS11 Paper feed tray size detector (Paper feed tray 1)Tact switch Detects the paper size. Detec

MX-3610N EXTERNAL VIEW AND INTERNAL STRUCTURE 3 – 11B. 36cpm machineSignal name Name Type Function/Operation Note1TUD_CL Transfer mode detector (CL)

MX-3610N EXTERNAL VIEW AND INTERNAL STRUCTURE 3 – 12CSS11 Paper feed tray size detector (Paper feed tray 1)Tact switch Detects the paper size.Detect

MX-3610N EXTERNAL VIEW AND INTERNAL STRUCTURE 3 – 136. SwitchesA. 18cpm/20cpm/23cpm/31cpm(G) machineSignal name Name Type Function/OperationDHSW Deh

MX-3610N EXTERNAL VIEW AND INTERNAL STRUCTURE 3 – 14B. 26cpm/36cpm/31cpm(A) machineSignal name Name Type Function/OperationDHSW Dehumidifier heater

MX-3610N EXTERNAL VIEW AND INTERNAL STRUCTURE 3 – 157. Clutches and solenoidsA. 18cpm/20cpm/23cpm/26cpm/31cpm machine(1) 18cpm/20cpm machine1TURC_2S

MX-3610N EXTERNAL VIEW AND INTERNAL STRUCTURE 3 – 16(2) 23cpm/26cpm/31cpm machineSignal name Name Type Function/Operation1TURC_1 Primary transfer se

MX-3610N NOTE FOR SERVICING - iMX-3610NService Manual NOTE FOR SERVICING1. Precautions for servicing• When servicing, disconnect the power plug, the

MX-3610N EXTERNAL VIEW AND INTERNAL STRUCTURE 3 – 17B. 36cpm machineSignal name Name Type Function/Operation1TURC_1 Primary transfer separation clut

MX-3610N EXTERNAL VIEW AND INTERNAL STRUCTURE 3 – 188. MotorsA. 18cpm/20cpm/23cpm/26cpm/31cpm machine(1) 18cpm/20cpm machinePOMSPFMSPMFUMMIMPGMPRMOS

MX-3610N EXTERNAL VIEW AND INTERNAL STRUCTURE 3 – 19(2) 23cpm/26cpm/31cpm machine* 18cpm machine are not installed.Signal name Name Type Function/Op

MX-3610N EXTERNAL VIEW AND INTERNAL STRUCTURE 3 – 20B. 36cpm machineSignal name Name Type Function/OperationADUM ADU motor Stepping motor Drives the

MX-3610N EXTERNAL VIEW AND INTERNAL STRUCTURE 3 – 219. RollersA. 18cpm/20cpm/23cpm/26cpm/31cpm machine(1) 18cpm/20cpm machine38391822201727*28*21014

MX-3610N EXTERNAL VIEW AND INTERNAL STRUCTURE 3 – 22(2) 23cpm/26cpm/31cpm machine383918223120172728210141391516212423712301932262540 37 35 44 43182

MX-3610N EXTERNAL VIEW AND INTERNAL STRUCTURE 3 – 23* 18cpm machine are not installed.No. Name Function/Operation1 Transport roller 1 (Idle) Apply a

MX-3610N EXTERNAL VIEW AND INTERNAL STRUCTURE 3 – 24B. 36cpm machine38391822313217210141391516212423712302526271928484740 37 35 44 43182029114546636

MX-3610N EXTERNAL VIEW AND INTERNAL STRUCTURE 3 – 25No. Name Function/Operation1 Transport roller 1 (Idle) Apply a pressure to paper and the transpo

MX-3610N EXTERNAL VIEW AND INTERNAL STRUCTURE 3 – 2610. LampsA. 18cpm/20cpm/23cpm/31cpm(G) machine(1) 18cpm/20cpm machineCL_ONCCFTDL_YDL_CHL_LMHL_UM

MX-3610N NOTE FOR SERVICING - ii• Place of direct sunlight.Plastic parts and ink may be deformed, discolored, or mayundergo qualitative change.It may

MX-3610N EXTERNAL VIEW AND INTERNAL STRUCTURE 3 – 27(2) 23cpm/31cpm(G) machineSignal name Name Type Function/OperationCCFT LCD backlight LED LCD bac

MX-3610N EXTERNAL VIEW AND INTERNAL STRUCTURE 3 – 28B. 26cpm/36cpm/31cpm(A) machineSignal name Name Type Function/OperationCCFT LCD backlight LED LC

MX-3610N EXTERNAL VIEW AND INTERNAL STRUCTURE 3 – 2911. Fans and filterA. 18cpm/20cpm/23cpm/26cpm/31cpm machineSignal name Name Function/OperationFU

MX-3610N EXTERNAL VIEW AND INTERNAL STRUCTURE 3 – 30B. 36cpm machineSignal name Name Function/OperationFUFM Fusing cooling fan Cools the fusing sect

MX-3610N EXTERNAL VIEW AND INTERNAL STRUCTURE 3 – 3112. GatesA. 18cpm/20cpm/23cpm/26cpm/31cpm machineNo. Name Function/Operation1 Switchback gate Sw

MX-3610N EXTERNAL VIEW AND INTERNAL STRUCTURE 3 – 32B. 36cpm machineNo. Name Function/Operation1 Switchback gate Switchbacks paper to transport to t

MX-3610N EXTERNAL VIEW AND INTERNAL STRUCTURE 3 – 3313. HeaterSignal name Name Function/OperationDHS Scanner dehumidifying heater Dehumidifies the s

MX-3610N EXTERNAL VIEW AND INTERNAL STRUCTURE 3 – 3414. PWB/Memory deviceA. 18cpm/20cpm/23cpm/31cpm(G) machine114162174135911102161978201815 1227262

MX-3610N EXTERNAL VIEW AND INTERNAL STRUCTURE 3 – 35No. Name Function/Operation1 MFP control PWB Controls image data (compression, decompression, an

MX-3610N EXTERNAL VIEW AND INTERNAL STRUCTURE 3 – 36B. 26cpm/31cpm(A) machine113152163124810951867191714 11202625212224 2327

MX-3610N NOTE FOR SERVICING - iii5. Note for repairing/replacing the LSUWhen repairing or replacing, be sure to observe the followingitems.• When rep

MX-3610N EXTERNAL VIEW AND INTERNAL STRUCTURE 3 – 37No. Name Function/Operation1 MFP control PWB Controls image data (compression, decompression, an

MX-3610N EXTERNAL VIEW AND INTERNAL STRUCTURE 3 – 38C. 36cpm machine11416317413591110619782018152 12212726222325 2428

MX-3610N EXTERNAL VIEW AND INTERNAL STRUCTURE 3 – 39No. Name Function/Operation1 MFP control PWB Controls image data (compression, decompression, an

MX-3610N EXTERNAL VIEW AND INTERNAL STRUCTURE 3 – 4015. Fuses and ThermostatsA. 18cpm/20cpm/23cpm/26cpm/31cpm machine(1) 18cpm/20cpm machineF1F2TS L

MX-3610N EXTERNAL VIEW AND INTERNAL STRUCTURE 3 – 41(2) 23cpm/26cpm/31cpm machineSignal name Name 100v series 200v series SectionF1 Fuse 20A 250V T

MX-3610N EXTERNAL VIEW AND INTERNAL STRUCTURE 3 – 42B. 36cpm machineSignal name Name 100v series 200v series SectionF1 Fuse 20A 250V T10AH 250V AC

MX-3610N EXTERNAL VIEW AND INTERNAL STRUCTURE 3 – 4316. LockNo. Name Function/Operation1 Scanner lock Fixes the scanner during transit.2 Paper feed

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 1MX-3610NService Manual [4] ADJUSTMENTS AND SETTINGS1. GeneralEach adjustment item in the adjustment item list

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 2ADJ 10/SET1Color balance and density adjustment10D Copy / Image send / FAX image quality adjustment (Individu

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 33. Details of adjustment ADJ 1 Adjust the developing unit 1-A Adjust the developing doctor gapThis adjustment

MX-3610N PRODUCT OUTLINE 1 – 1MX-3610NService Manual [1] PRODUCT OUTLINE1. System diagramA. 18cpm machineMX-1810UDIGITAL FULL COLORMULTIFUNCTIONAL S

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 44) Mark the developing roller surface on the extension line of theneedle with the needle at 2 - 3mm from the

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 52) Close the front cabinet.3) Select a developing unit to be adjusted.4) When [EXECUTE] key is pressed, it is

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 6 ADJ 2 Adjusting high voltage values 2-A Adjust the main charger grid voltageThis adjustment must be performe

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 7 2-B Adjust the developing bias voltageThis adjustment must be performed in the following cases:* When the MC

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 8 2-C Transfer current and voltage adjustmentThis adjustment must be performed in the following cases:* When t

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 93) Enter the adjustment value (specified value), and press [OK] key.When [EXECUTE] key is pressed, the voltag

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 10 ADJ 3 Image density sensor adjustmentBefore executing this adjustment, check to confirm the followingitems.

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 11b. Color image density sensor (Image registration sensor F) calibration (Method by SIM44-13)1) Enter the SIM

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 12 3-B Image density sensor adjustmentThe image density sensor standard reflection plate and the transferbelt

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 133) Select the paper feed tray with paper in it with the key. (Any paper size will do.)4) Press [EXECUTE] key

MX-3610N PRODUCT OUTLINE 1 – 2B. 20cpm machineMX-2010UDIGITAL FULL COLORMULTIFUNCTIONAL SYSTEMMX-DE12STAND/1x500 SHEETPAPER DRAWERMX-DE13STAND/2x500

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 144) Select a paper feed tray to be adjusted.5) Press [EXECUTE] key.The adjustment pattern is printed out.6) S

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 157) Press [OK] key.The adjustment result becomes valid. 4-D Copy mode image lead edge position, image loss, v

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 169) Press the [EXECUTE] key, and the machine starts loadingRSPF adjustment patterns (for the back side).* The

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 174) Write down the displayed skew level.Meaning of the skew level value and the adjustment pro-cedure* If &qu

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 186) Repeat the procedures 2) to 4) again, and check to confirmthat C, M, and Y (SKEW) are OK.If any of them i

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 195) Open the front cover, remove the waste toner box, and turn thefour LSU image skew adjustment screws in th

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 20 5-C Color registration offset adjustment (No need to adjust normally)This adjustment is used to set the off

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 21(Reference adjustment value)1 scale/1 (When the set value is changed by 1, shift is made by 1scale.)If there

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 222) Turn the scanner drive pulley manually and shift the scannerunit B to bring it into contact with the stop

MX-3610N ADJUSTMENTS AND SETTINGS 4 – 232) Set the test chart prepared in the procedure 1) on the docu-ment table. (Shift the test chart edge 30mm f