Sharp JH-1600E Specifications download pdf (Page 17)

Connecting to AC Disconnect

This section describes the connection between the solar power inverter and the AC disconnect. The wires needed are

the AC output cable from the solar power inverter (one pair of wires) and the grounding wire.

Follow all WARNING and CAUTION of Wiring Solar Power Inverter (page 9).

(1) Attach a forked spade or lug connector to the AC cables before connecting to the

terminal block.

Pass the wire through the gland before connecting to the terminal.

• Make sure AC disconnect is open.

• Use outdoor wiring and conduit on the outdoor section between the solar power inverter and

the PV modules.

• The AC disconnect includes over current protection.

AC terminal block for AC disconnectGND terminal

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 26 27

No comments

Sharp JH-1600E Specifications Page 17