Sharp JH-1600E Specifications download pdf (Page 12)

Before wiring

AC Circuit breaker

This breaker must be sized to handle the rated maximum output voltage and current of the inverter. (Please refer to the

Specification section on page 23.)

Recommended AC circuit breaker:

For JH-1600E: 10 Amps / 250 VAC.

To wire the main utility service panel to inverter:

(1) Connect the ground wire (green and yellow) from the ground terminal in the main utility

service panel to GND ( ) terminal in the inverter.

(2) Connect the L (or Line) to Line terminal in the inverter.

(3) Connect the N (or Neutral) to Neutral terminal in the inverter.

(4) Ensure all connections are correctly wired and proper torque according to values

shown in the table below.

DC cables, isolator fuse

AS per AS/NZS 5033

Wire Size (mm

)

Torque

In-lb Nm

Up to 4 12 1.3

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 26 27

No comments

Sharp JH-1600E Specifications Page 12