Sharp UX-460 Specifications download pdf (Page 58)

Sending a Fax by Automatic Dialling

If you are sending a fax, load the

document(s).

• If desired, press to set the

resolution and/or contrast.

Press once. <REDIAL> appears in the display, followed by the last

number dialled. Make sure the number that appears is the number you

wish to dial.

If you are sending a fax, press . Dialling and transmission

begins.

If you are making a phone call, lift the handset. Dialling begins.

RESOLUTION/

RECEPTION MODE

START/MEMORY

Redial

You can automatically redial the last number dialled. This procedure can be

used to send a fax or make a phone call.

Note:

If a fax transmission is unsuccessful and DOCUMENT JAMMED appears in

the display, remove the document as explained on page 93. (This may occur if

the other fax machine doesn’t respond properly when you attempt to send the

document.)

Automatic redialling

If you use automatic dialling (including Direct Keypad Dialling) to send a fax

and the line is busy, the fax machine will automatically redial the number. The

fax machine will make three redial attempts at an interval of five minutes.

During this time, RECALLING will appear in the display, followed by a two-digit

number assigned to the fax job. You will not be able to dial any other locations

while the message appears.

READY TO SEND

all.bookPage56Tuesday,July15,20039:53AM

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 102 103

No comments

Sharp UX-460 Specifications Page 58