Sharp MX-C300P Installation Manual download pdf (Page 33)

CHANGING THE PORT

When using the machine in a Windows environment, follow the steps below to change the port when you have changed

the IP address of the machine or have installed the PC-Fax driver when the machine is connected with a USB cable. If

the machine is being used on an IPv6 network, follow the steps 1 to 3 below and see "Changing to a Standard TCP/IP

Port" (page 32) for the remaining steps of the procedure to change the port.

Click the [Start] button ( ), click

[Control Panel], and then click [Devices

and Printers] (or [View devices and

printers]).

• In Windows XP/Server 2003, click the [start] button

and then click [Printers and Faxes].

• In Windows 8/8.1/Server 2012, right-click in the startup

window (or swipe upward from the bottom edge), then

select [Taskbar] → [All Applications] → [Control Panel]

→ [Devices and Printers] → [Printers].

Open the printer properties window.

(1) Right-click the printer driver icon of the

machine.

(2) Select [Printer properties].

In Windows XP, select [Properties].

Adding or changing a port.

(1) Click the [Ports] tab.

(2) Click the [Add Port] button.

If [Printers and Faxes] does not appear in the [start]

menu in Windows XP, click the [start] button, click

[Control Panel], click [Printers and Other Hardware],

and then click [Printers and Faxes].

To change to a previously created port such as USB

port, select the desired port (USB001, etc.) from the

list and click the [Apply] button. This changes the port.

(2)

(1)

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 43 44

No comments

Sharp MX-C300P Installation Manual Page 33