Sharp MX-7500N User Manual download pdf (Page 25)

Input range: [80] to [120] (1 = 0.20944 mm)

Default: [100]

3.2 Trimming Module

Select [Trimming Module] in the Peripheral Adjustment

screen.

3.2.1 Trimming Original Point Adjustment

This performs adjustment of trimming origin position for

saddle stitch (fold and staple).

This corrects deviation of the actual cutting amount from

the amount set with the trimming setting.

1) Select [Trimming Original Point Adjustment] in the

Trimming Module screen.

2) Adjust the trimming original point for saddle stitching.

The 10-key pad appears when each of the textboxes is

tapped. Enter the desired values.

Input range: [50] to [150] (1 = 0.1 mm)

Default: [100] for each

3.3 Finisher (When the 100-sheet finisher is

installed)

Select [Finisher] in the Peripheral Adjustment screen.

3.3.1 Staple Position Adjustment

This performs staple position adjustment for staple in the

direction of paper width.

1) Select [Staple Position Adjustment] in the Finisher

screen.

2) Adjust the staple positions in the direction of paper

width.

The 10-key pad appears when each of the textboxes is

tapped. Enter the desired values.

Input range:

One staple: [70]-[130] (1 = 0.1 mm)

Two staples: [85]-[115] (1 = 0.1 mm)

Default: [100] for each

Note:

Staple position in paper feed direction cannot be

adjusted.

Functional Restriction

For 2 staples, the staple positions that can be adjusted

vary depending on the paper size and the number of

sheets included in a set to be stapled as the following table

shows:

Paper size

Number of

sheets

included in

a set

Staple position that

can be adjusted

A4R/Letter R or

smaller

20 sheets or

less

Only the staple at back

More than 20

sheets

Both staples at front

and back

Larger than

A4R/Letter R

Both staples at front

and back

1 2 ... 20 21 22 23 24 25 26 27 28 29 30

Comments to this Manuals

No comments

Sharp MX-7500N User Manual Page 25

Comments to this Manuals

Related products and manuals for Multifunctionals Sharp MX-7500N