Sharp SL-5500 User Manual download pdf

The Zaurus SL-5500 is a new exciting PDA from Sharp with exceptional Personal

Information Management, Mobile Communications and Mobile Multimedia tools.

You must prepare your Zaurus SL-5500 before you install your Zaurus software. Please

follow this Quick Start Guide, which will walk you through the installation of your Zaurus.

This Quick Start Guide is for experienced users of PC’s or handheld PDA’s and is not

intended to be used in place of the manuals supplied with your Zaurus. If at any time you

are not sure how to setup your Zaurus, please refer to the Start-up Guide and Operation

Manual the came with your Zaurus.

1. On the back of the Zaurus, slide the battery

replacement switch to the “REPLACE BATTERY”

position.

2. Gently slide replacement battery compartment lid

to the right and remove it from the Zaurus.

Quick Start Guide - Read This First

Congratulations on your new purchase of the Sharp Zaurus SL-5500!

Opening the Battery

Compartment Lid

Connecting the Power

Disconnecting the

Zaurus & Connecting

the Power to the

Docking Station

Docking the Zaurus

USB Driver Installation

Welcome Screen & Entering

Personal Information

Install the Lithium Ion Battery

USB Driver Installation - Continued

Install the Synchronization

Software

Congratulations!

On the installation CD select - Step. 3 “Installing

the Synchronization Software”

NOTE: You may only install one synchronization

software program on your PC. If you try to

install both software programs you will get an

error.

If you are a Microsoft® Outlook® user click on

this Icon to install the software

If you Don’t use Outlook and want to install the

Qtopia Desktop Synchronization software click

this Icon to install the software.

When you are finished installing your

synchronization software you will be asked to

reboot your computer once again.

1. When the USB installation is completed you will be asked to Reboot your PC.

Depending on the Windows® Operating system you are using, the following screen may

vary.

After rebooting your PC resume your installation by. “Installing the Synchronization

Software”

1. Connect the AC Power Cord to the AC Adapter.

2. Connect the AC adapter to the Zaurus.

3. Plug the AC Power Cord into an AC Outlet.

4. The Amber LED will begin to glow indicating that the Zaurus is charging.

5. Turn On the Zaurus by pressing the On/Off key (Cancel key).

• If the battery level is low, the power will not turn on even if you attach the AC adapter.

Charge the battery to its full capacity.

1. After the Welcome screen appears, tap on

the screen to go to the calibration screen.

2. At the calibration screen, tap on the cross

hairs to calibrate the touch screen panel.

3. Set the System Time of the Zaurus by

entering the appropriate time zone

information. When finished tap on the

Next button.

4. Using the keyboard of the Zaurus, enter

your Personal Details. When finished tap

on the Next button.

5. If you want to enter a Passcode for

Security purposes, enter a passcode. (See

Start-up Guide for details.) When finished

tap on the Finished button.

6. When you are finished with the Personal

Information setup you will see the Home

screen.

7. Turn Off your Zaurus by holding down the

On/Off Key (Cancel Key).

1. Insert the battery on the ribbon tab making sure

that the triangle, plus (+) and minus (-) signs on the

battery match the markings on the inside of the

Zaurus.

2. Replace the battery compartment lid with the

ribbon tab inside.

3. Slide the battery replacement switch to the

“NORMAL OPERATION” position.

4. When using the battery for the first time make sure

you charge the unit for 24 hours.

Page 1Page 4

Page 2

You are now ready to use your Zaurus SL-

5500 and Synchronization Software. On

the other side of this Quick Start Guide

Sheet, there is information about how to

use your Zaurus and software.

AC adapter jack

AC adapter

connector

AC adapter

AC power

cord

To AC outlet

AC adapter

AC power

cord

1. Disconnect the Zaurus from the AC

adapter.

2. Connect the AC adapter to the

Docking Station.

1. Open the Sharp I/O Port cover of the SL-

5500 and slide the Zaurus into the

Docking Station

2. Turn On the Zaurus by pressing the On/Off

key (Cancel key).

You are now ready to install the Zaurus

Software.

Important: Make sure that your Zaurus

is Powered On during this part of the

installation to insure that your PC finds

your device.

Make sure that your Zaurus is Powered

On during this part of the installation to

insure that your PC finds your device.

1. Turn on your PC and insert the Zaurus

installation CD into your CD-ROM drive.

2. Plug the USB connector of the Docking

Station into the USB port of your

computer.

3. Either “Found New Hardware Wizard” or

“Add New Hardware Wizard” dialog box

will appear notifying you if you want to

install the device.

4. Follow the Wizard until both the Network

and TCP/IP drivers are installed.

Page 3

USB port

USB connector

USB cable

Docking

Station

Docking Station

AC adapter jack

To AC outlet

AC adapter (EA-70)

PRINTED IN JAPANTINSE1281YCZZ

1 2

Connecting the Power 1

Summary of Contents

Page 1 - Connecting the Power

The Zaurus SL-5500 is a new exciting PDA from Sharp with exceptional Personal Information Management, Mobile Communications and Mobile Multimedia tool

Page 2

To quickly find a contact, just typethe first few letters on the keyboard.Address BookMain Navigation Tab MenusCF Card SlotHeadphone/Mic. JackIR PortS

Comments to this Manuals

No comments

Sharp SL-5500 User Manual

Browse online or download User Manual for MP3/MP4 players Sharp SL-5500. Quick Start Up Guide for Zaurus

Summary of Contents

Comments to this Manuals

Related products and manuals for MP3/MP4 players Sharp SL-5500