Sharp PN-655U User Manual download pdf (Page 40)

PC Operation (Continued)

2. Daisy chain connection from a single PC...... Advanced operation

Connect with RS-232C straight cable between the PC COM port (RS-232C connector) and the

RS-232C input terminal on the rear of monitor.

Next, connect RS-232C straight cable to the first monitor’s RS-232C output terminal and to the

second monitor’s RS-232C input terminal. Connect in the same way to the third and subsequent

monitors. The number of connectable monitors varies depending on the length of the cable used and

the surrounding environment.

Communication conditions

Set the RS-232C communication settings on the PC to match the monitor’s communication settings.

RS-232C straight cable

(commercially available)

To COM port

RS-232C

input terminal

RS-232C

output terminal

RS-232C

input terminal

RS-232C

output terminal

(To the third monitor)

RS-232C

OUT

RS-232C

OUT

▼ First monitor

▼ PC

▼ Second monitor

Baud rate 9,600 bps

Data length 8 bits

Parity bit None

Stop bit 1 bit

Flow control None

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 127 128

No comments

Sharp PN-655U User Manual Page 40