Sharp MD-DR470H Specifications download pdf (Page 19)

02/12/18 MDDR470_SEEG_E.fm

E-19

MD-DR470H

ENGLISH

Basic Operation

-Recording-

Recording (continued)

To prevent recorded MiniDiscs from being

erased accidentally

Slide the accidental erase prevention tab, located on the

side of the MiniDisc, in the direction indicated by the

arrow.

The MiniDisc will then be protected against accidental

erasure.

To add a recording to such a MiniDisc, slide the acciden-

tal erase prevention tab back to its original position.

Helpful tip when attaching a label

When attaching a label to an MiniDisc cartridge, be sure

to note the following. If the label is not attached properly,

the MiniDisc may jam inside the unit and you may not be

able to remove it.

About sampling rate converter

This portable MD incorporates a sampling rate converter

so that it can record from digital radios or DAT tape

recorders.

Note for digital recording

You cannot copy a MiniDisc that you recorded from digital

inputs to another MiniDisc or DAT. It is prevented by the

SCMS (Serial Copy Management System). Recording

from analogue inputs is not affected.

If the label peels off or partially lifts

away, replace it with a new one.

Do not put a new label on top of an ex-

isting one.

Attach the label only in the specified

location.

Digital signals Digitally recorded

MiniDisc

Cannot record

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 65 66

No comments

Sharp MD-DR470H Specifications Page 19