Sharp LCD colour TV Specifications download pdf (Page 68)

Removing the stand

For wall mounting with the optional bracket, remove the stand.

Before detaching/attaching the stand

• Before detaching (or attaching) the stand, unplug the AC cord from the AC outlet.

• Remove all terminal covers and connected cables.

• Lay the TV down on cushioning (such as a blanket) over a table.

• Make sure two or more people perform the operation.

CAUTION

• Do not remove the stand from the TV unless using an optional bracket to mount it.

Appendix

NOTE

• Detach the cable clamps on the rear of the TV when using the optional mount bracket.

• To use this TV mounted on a wall, ﬁ rst remove the cover at the 4 locations on the rear of the TV, and then use the screws

supplied with the wall mount bracket to secure the bracket to the rear of the TV.

NOTE

• To attach the stand, perform the above steps in reverse order.

Hanging on the wall

AN-52AG4 wall mount bracket.

(See the bracket instructions for details.)

Vertical mounting

Angular mounting

About setting the TV angle

Unfasten the four screws used to secure the stand

in place.

Detach the stand from the TV. (Hold the stand so

it will not drop from the edge of the base area.)

Remove the stand post from the stand base and

attach it to the TV.

Hex key

Handling and precautions with the wall-mounted TV

• You can mount the TV on the wall using the optional AN-52AG4 bracket.

• For details, refer to the instructions supplied with the optional bracket.

CAUTION

• This TV should be mounted on the wall only with the AN-52AG4 (SHARP) wall mount bracket. The use of other wall

mount brackets may result in an unstable installation and may cause serious injuries.

• Installing the Liquid Crystal Television requires special skill that should only be performed by qualiﬁ ed service

personnel. Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper

mounting or mounting that results in accident or injury.

Using an optional bracket to mount the TV

• You can ask a qualiﬁ ed service personnel about using an optional AN-52AG4 bracket to mount the TV to the wall.

• Carefully read the instructions that come with the bracket before beginning work.

Mounting the TV on the wall

AN-52AG4

Stand post

42D65H_en_h.indd 6742D65H_en_h.indd 67 10/29/08 8:27:23 AM10/29/08 8:27:23 AM

1 2 ... 63 64 65 66 67 68 69 70

Comments to this Manuals

No comments

Sharp LCD colour TV Specifications Page 68

Comments to this Manuals

Related products and manuals for LCD TVs Sharp LCD colour TV