Sharp LCD colour TV Specifications download pdf (Page 60)

Connecting a PC

Selecting the input resolution

• Some input signals may have to be registered manually to

display properly.

• The pairs of input signals (resolutions) in the list below are

not distinguishable when received. In such case, you have

to set the correct signal manually. After setting once, it will

display when the same signal (resolution) is input again.

1024 x 768 1360 x 768

NOTE

• You can only select the “Input Signal” on the Setup menu

when receiving one of the 2 input signals listed above.

Press MENU and the MENU screen displays.

Press c/d to select “Option”.

Input resolution settings

Press

to select “Fine Sync.”, and then

press ENTER.

Press

to select the desired input signal

on the display, and then press ENTER.

Press

to select “Input Signal”, and then

press ENTER.

(Example)

Input Signal

Auto Sync.

H-Position [ 90]

V-Position [ 60]

Clock [ 90]

Phase

Reset

[ 8]

1024 x 768

1360 x 768

Manually selecting the resolution

of the picture input signal

42D65H_en_f.indd 5942D65H_en_f.indd 59 10/29/08 8:26:50 AM10/29/08 8:26:50 AM

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 69 70

No comments

Sharp LCD colour TV Specifications Page 60