Sharp PC-A250 Specifications download pdf (Page 58)

LAN unit

Your

computer is equipped with a 100 Base-TX/IO Base-T LAN interface.

Turn off the computer.

Attach the provided core to one end of your LAN cable. Insert the cable into

the core and close the core until it clicks.

’

Connect the core end of the LAN cable into the LAN jack on the rear side of

the computer.

Connect the other end of the LAN cable into the network hub.

Turn on the notebook.

When Press <F2> to enter SETUP appears, press F2.

In the Advanced menu, enable LAN.

Press Esc; then Enter twice. The system restarts.

In the Network dialog box, set fields according to your network status. Refer

to your network administrator.

You cannot use the LAN unit when your notebook is in MS-DOS

mode.

You cannot use the LAN unit when you connect an optional external

battery.

If you cannot access the network,

From the Start menu, select Settings

Control Panel.

Double-click the Network icon.

In the Network dialog box, select

Conjiguration

tab.

Click Realtek

RTL8139

(A) Fast Ethernet

NIC;

then

Propertips.

Click Advanced tab, and select Link

Speed/Duplex

Mode in Property: and

enter an appropriate value in Value:.

Click OK twice and restart your computer.

5-5

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 79 80

No comments

Sharp PC-A250 Specifications Page 58