Sharp EL-6360 Specifications download pdf (Page 60)

Grasp the edge of the memory module, and then gently pull the memory module (2) out of

the memory module slot.

CAUTION: To prevent damage to the memory module, hold the memory module by the edges

only. Do not touch the components on the memory module.

To protect a memory module after removal, place it in an electrostatic-safe container.

Reverse this procedure to install the expansion memory module.

Base enclosure

Description Spare part number

Base enclosure (includes battery release latch and 4 rubber feet) 639468-001

Rubber Kit (includes 7 base enclosure rubber feet and 4 base enclosure screw covers) 639483-001

Before removing the base enclosure, follow these steps:

1. Shut down the computer.

Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet

and then unplugging the AC adapter from the computer.

4. Remove the battery (see

Battery on page 33), and then remove the following components:

a. Service cover (see

Solid-state module on page 34)

Solid-state module (see

Solid-state module on page 34)

52 Chapter 4 Removal and replacement procedures

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 96 97

No comments

Sharp EL-6360 Specifications Page 60