Sharp SJ-43N-BE Service Manual download pdf (Page 24)

SJ-P43N/43N

SJ-P47N/47N

Fig. A-26

(2)-9. Wind up Leading wire sealer as shown in Fig. A-27

Fig. A-25

(2)-8. Set Heater cover on Drain support, and bend top

edge c and d to outside as shown in Fig. A-26.

Fig. A-23

(2)-6. Bend a and b of Drain support al to right angle

(90˚) to set Def. heater ass'y. (Fig. A-24)

Fig. A-22

(2)-5. Wind the Glass cloth tape (3M: No. 27) to lead wire

of Def. heater ass'y. (2 places)

(2)-4. Replace Def. heater ass'y with new one. (2)-7. Stick the longer wire to the Drain support by

aluminum tape (2 pieces), and wind vinyl tape

(2 pieces) to lead wires of Def. heater ass'y by

aluminum tape as shown in Fig. A-25.

Note: Glass cloth tape part shall be both side of Drain

support to protect the lead wire from damaged.

Fig. A-24

Heater cover

Def.heater ass’y

Drain support al

Def. heater ass’y

Glass cloth tape

(W40 x L25)

Glass cloth tape

Wind the Glass cloth tape

more than 2 turns.

360

(40)

(40) 50

Lead wire

Drain support al

This side is longer wire

This side is shorter wire

Def.heater ass’y

Glass cloth tape

aluminum tape

(more than 2 turns)

[back side]

[bottom side]

Sec. AA

(W25 X L40)

Fig. A-27

(2)-10

. Set the assembly above on the food liner by fixing

a screw.

top edge

Drain support al

Heater cover

Def.heater ass’y

Sec. BB

Drain support al

Heater cover

Def.heater ass’y

190 20

Leading wire sealer

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 35 36

Comments to this Manuals

No comments

Sharp SJ-43N-BE Service Manual Page 24

Comments to this Manuals

Related products and manuals for Fridges Sharp SJ-43N-BE