Sharp UX-465L Specifications Page 115

  • Download
  • Add to my manuals
  • Print
  • Page
    / 136
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 114
Problems and Solutions
113
11. Trouble-
shooting
General problems
Problem Solution
Information cannot be
programmed in the fax.
Make sure the fax is plugged in and the imaging film
and paper have been loaded. (Programming is not
possible if the imaging film and printing paper have
not been loaded.) See
Loading the Imaging Film
and
Loading Printing Paper
in Chapter 1.
Nothing appears in the
display.
Make sure the power cord is properly plugged into a
power outlet.
Connect another electrical appliance to the outlet to
see if it has power.
The machine does not
respond when you press
any of its keys.
If a beep sound is not made when you press the keys,
unplug the power cord and then plug it in again
several seconds later.
Automatic document
feeding does not work for
transmission or copying.
Check the size and weight of the document (see
Transmittable Documents
on page 55).
Voice calls taken on an
extension phone are
interrupted by the fax.
The fax may interrupt during a voice call if the
reception mode is set to TAD To prevent interruption
on a tone dial extension phone, press any three keys
on the extension phone after answering. (Note: Do not
enter the code to activate fax reception.)
No reception occurs when
polling is attempted.
Make sure you have not run out of paper.
Make sure the transmitting machine is set to answer
automatically.
If the transmitting machine has polling security, make
sure that your fax number has been entered both in
your machine and in the transmitting machine.
Page view 114
1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 135 136

Comments to this Manuals

No comments