Sharp GZ100 User's Guide download pdf (Page 12)

12 Getting Started

Charging the Battery

You must charge the battery for at least 2 hours before

using your phone for the first time.

Using the Charger

1. Remove the cover of the external connector, and

connect the charger to the external socket located at

the bottom of the phone by pressing both sides

indicated with arrows. Connect the charger to an

AC outlet. Keep the cover in a safe place so as not

to lose it.

When the phone is charging, the animated battery

status icon ( ) in the upper right of the screen

displays the current status.

Standard charging time: Approx. 2 hours.

Note

• Charging time may vary depending on the state of the

battery and other conditions (See “Battery” on

page 116).

To Disconnect the Charger

Long press the side buttons of the charger, then

disconnect the charger from the external socket of the

phone.

2. When charging is complete, the battery indicator

icon displays the full charge status. Unplug the

charger from the AC outlet, then unplug the charger

connector from the phone. Put the cover back.

Note

• Do not use any non approved charger, this may

damage your phone and invalidate any warranty (See

“Battery” on page 116 for details).

To Charge Using the Cigarette Lighter Charger

The optional cigarette lighter charger supplies power

for charging from the cigarette lighter socket of a car.

Battery Level Indicator

The current battery level is displayed in the upper right

hand side of the screen.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 127 128

No comments

Sharp GZ100 User's Guide Page 12