Easy to Use Functions
-89
Selected Item
Normal
Level A
Level B
Description
All On-screen Displays are displayed.
Input/Freeze/Enlarge/Auto Sync/Volume/AV Mute are not displayed.
All On-screen Displays are not displayed.
(except Menu, On-screen displays displayed when the LENS button is pressed, and
warning displays (Power off/Temp./Lamp, etc.))
Setting On-screen Display
This function allows you to turn on or off the on-screen messages. When setting “ Level B”
in “OSD Display”, the input mode display (e.g. “INPUT 1”) will not appear, even if the INPUT
button is pressed.
4 Press to move the inset pic-
ture.
• The inset picture will be moved to the
inset picture frame.
Note
• The inset picture can only be displayed
with composite video (NTSC/PAL/
SECAM) or S-Video signal.
• The Freeze function works only with the
inset picture, when the Pict in Pict mode
is in operation.
When the signal entered into INPUT 1 is
as follows, Pict in Pict does not work:
• With a resolution that exceeds SXGA.
• When the input signal is 480
I , 480P,
720P or 1080
I.
• When the input signal has changed to
the Interlace mode using RGB signals.
• When the picture display mode is set to
“DOT BY DOT”.
• When no signals are sent to INPUT 1,
or when the resolution or refresh rate
(vertical frequency) is changed.
• You can use
on the GyroRemote or
on the projector to change the inset
picture.
Turning Off the
On-screen Display
Select “OSD Display” in the “Options
(1)” menu
➝ For operating the menu screen, see
pages 50 and 52.
➝ For operating the menu screen using
the GyroRemote see pages 54 and 55.
Note
• Standby message in INPUT 4 will appear
regardless of “OSD Display” level.
PG-M25X#E#p78_96.p65 02.4.29, 3:22 PM89
Comments to this Manuals