Sharp PG-M25X Owner's Manual Page 123
- Page / 130
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
Appendix
-119
Specifications
Digital Multimedia Projector
PG-M25X
NTSC 3.58/NTSC 4.43/PAL/PAL-M/PAL-N/PAL 60/SECAM/
DTV480I/DTV480P/DTV720P/DTV1080I
Single Chip Digital Micromirror Device™ (DMD™) by Texas Instruments
Panel size: 0.7" (17.8 mm), 1 chip XGA DMD
No. of dots: 786,432 dots (1,024 [H] × 768 [V])
1–1.2 × zoom lens, F1.75–2.04, f = 28.0–33.5 mm
High Intensity Discharge Lamp (HID Lamp), DC 210 W
29-pin connector
DVI input signal: Digital 250–1,000 mV 50 Ω
Analog 0.7 Vp-p 75 Ω
Y: 1.0 Vp-p, sync negative, 75 Ω terminated
P
B
: 0.7 Vp-p, 75 Ω terminated
P
R
: 0.7 Vp-p, 75 Ω terminated
700 TV lines (DTV720P)
29-pin connector
RGB separate/sync on green type analog input: 0–0.7 Vp-p, positive, 75 Ω terminated
HORIZONTAL SYNC. SIGNAL: TTL level (positive/negative)
VERTICAL SYNC. SIGNAL: Same as above
4-pin Mini DIN connector
Y (luminance signal): 1.0 Vp-p, sync negative, 75 Ω terminated
C (chrominance signal): Burst 0.286 Vp-p, 75 Ω terminated
RCA connector: VIDEO, composite video, 1.0 Vp-p, sync negative, 75 Ω
terminated
12–230 MHz
43–200 Hz*
15–126 kHz
ø3.5 mm M
INIJACK: AUDIO, 0.5 Vrms, more than 47 kΩ (stereo)
PCMCIA-TYPE II
2.0 W (monaural)
4 cm × 3 cm
AC 100–240 V
3.2 A
50/60 Hz
295 W
XXXX BTU/hour
41°F to 95°F (+5°C to +35°C)
–4°F to 140°F (–20°C to +60°C)
Plastic
49.825 – 49.895 MHz (for U.S., Canada etc.), 40.667 – 40.695 MHz (for Europe, Oceania,
Asia)
8
5
⁄8" × 3" × 11
15
⁄16" (219 (W) × 76 (H) × 303 (D) mm) (main body only)
8
3
⁄4" × 3
1
⁄4" × 12
1
⁄2" (223 (W) × 83 (H) × 318 (D) mm) (including adjustment feet
and projecting parts)
5.8 lbs. (2.6 kg)
GyroRemote for U.S., Canada etc., GyroRemote for Europe, Australia, Oceania and Asia, Four
R-03 batteries, Power cord for U.S., Canada etc. (6', 1.8 m), Power cord for Europe, except U.K.
(6', 1.8 m), Power cord for U.K., Hong Kong and Singapore (6', 1.8 m), Power cord for Australia,
New Zealand and Oceania (6', 1.8 m), DVI to 15-pin D-sub cable (6', 1.8 m), USB cable (6', 1.8 m),
Carrying case, Lens cap (attached), Lens cap strap, Terminal cover (attached), CD-ROM, Opera-
tion manual, Quick reference guides, Wireless Reality operation manual, Wireless LAN PC
Card IMPORTANT INFORMATION.
Lamp unit (Lamp/cage module) (BQC-PGM20X//1), GyroRemote for U.S., Canada etc.
(RRMCG1631CESA), GyroRemote for Europe, Australia, Oceania and Asia (RRMCG1653CESA),
Four R-03 batteries (“AAA” size, UM/SUM-4, HP-16, or similar), Power cord for U.S., Canada etc.
(QACCDA007WJPZ), Power cord for Europe, except U.K. (QACCV4002CEZZ), Power cord for
U.K., Hong Kong and Singapore (QACCB5024CENA), Power cord for Australia, New Zealand
and Oceania (QACCL3022CEZZ), DVI to 15-pin D-sub cable (QCNWGA010WJZZ), USB cable
(QCNWG0001WJPZ), Two wireless LAN cards (AN-WC11B), Carrying case (GCASN0005CESA),
Lens cap (CCAPHA001WJ01), Lens cap strap (UBNDT0013CEZZ), Terminal cover
(GCOVD0103CESA), CD-ROM (UDSKA0058CEN1), Operation manual (TINS-A046WJZZ),
Quick reference guides, Wireless LAN PC Card IMPORTANT INFORMATION.
Product type
Model
Video system
Display method
DMD panel
Lens
Projection lamp
Component input signal
(INPUT1)
Horizontal resolution
Computer RGB input signal
(INPUT 1)
S-video input signal
(INPUT 2)
Video input signal
(INPUT 3)
Pixel clock
Vertical frequency
Horizontal frequency
Audio input signal
PC card slot
Audio output
Speaker system
Rated voltage
Input current
Rated frequency
Power consumption
Heat dissipation
Operating temperature
Storage temperature
Cabinet
GyroRemote Radio Frequency Range
Dimensions (approx.)
Weight (approx.)
Supplied accessories
Replacement parts
This unit has some inactive pixels within acceptable toler-
ances which may result in inactive dots on the picture screen.
This will not affect the picture quality or the life expectancy
of the unit.
This SHARP projector uses a DMD panel. This very so-
phisticated panel contains 786,432 pixels. As with any high
technology electronic equipment such as large screen TVs,
video systems and video cameras, there are certain ac-
ceptable tolerances that the equipment must conform to.
* Temporary noise may be visible with vertical frequencies above 100Hz if OSD functions are activated.
Specifications are subject to change without notice.
PG-M25X#E#p116_125.p65 02.4.29, 3:27 PM119
- DIGITAL MULTIMEDIA 1
- PROJECTOR 1
- OPERATION MANUAL 1
- Model No.: PG-M25X 2
- Serial No.: 2
- WARNING: 6
- PRODUCT DISPOSAL 6
- Outstanding Features 7
- 7. GyroRemote 8
- Contents 9
- Appendix 10
- Introduction 11
- IMPORTANT SAFEGUARDS 12
- IMPORTANT SAFEGUARDS (cont.) 14
- (Windows, Macintosh) 17
- Part Names 18
- Projector (Side View) 19
- Part Names (cont.) 20
- The GyroRemote 22
- 1 Double click on the rear 23
- 2 Make sure that the LED 23
- 3 Press , after leaving the 23
- Accessories 24
- Setup and Connections 25
- 1 Press the foot releases 26
- Example of Standard Setup 27
- Setup (cont.) 28
- Projection using a mirror 29
- Ceiling-mount setup 29
- 1 Plug in the supplied power 30
- Connecting to a Computer 31
- Using the DVI to 15-pin 31
- D-sub Cable 31
- Connecting to a 32
- Computer Using a DVI 32
- Cable (Sold Separately) 32
- Connecting to Video Equipment 33
- Connecting to Video 34
- Equipment Using an 34
- S-VIDEO, a Composite 34
- Video or an Audio Cable 34
- 2 Remove the card 35
- Connecting to a Monitor 36
- Basic Operation 37
- Image Projection 38
- 2 Press on the projector or 38
- 4 Press and select the input 39
- 5 Press or on the Gyro-Re 39
- Image Projection (cont.) 40
- 6 Press on the projector to 40
- 7 Press on the projector or 40
- Selecting the On-screen 41
- Display Language 41
- Adjusting the Lens 41
- 1 Press 42
- 2 Press or to 42
- 3 Press 43
- Using the GyroRemote 44
- : ASSIGN button 45
- : LEFT-CLICK/ENTER button 45
- : RIGHT-CLICK/UNDO button 45
- 2 Hold for more than 1 sec 46
- Using the GyroRemote (cont.) 46
- 1 Press located on the 46
- 3 Press on the GyroRemote 47
- 3 Press when the number of 47
- Using the Presentation Tools 48
- 1 Hold the GyroRemote and 48
- Red Green Blue Yellow 49
- Black White Purple Light blue 49
- Using the Line Function 50
- Connecting the 51
- Computer and the Projector 51
- 1 Move the GyroRemote while 52
- 2 Press or . It functions 52
- 1 Press and located in 53
- Using the Menu Screen 54
- 2 Press or to select the 55
- 3 Press or to select 55
- 4 Press or to adjust (set) 55
- 5 Press 55
- Using the Menu Screen (cont.) 56
- 4 Press 57
- 5 Press or to select 57
- 6 Press 57
- 7 Press 57
- Menu Bar Items 60
- Page 59 Page 96 61
- Menu Bar Items (cont.) 62
- Adjusting the Picture 63
- Adjusting the Picture (cont.) 64
- Adjusting Computer Images 65
- Selecting Adjustment Settings 66
- Special Mode Settings 66
- Checking the Input Signal 67
- Auto Sync Adjustment 67
- Auto Sync Display 68
- Function 68
- Easy to Use Functions 69
- Using the Network 70
- Wireless Channels 71
- DHCP server function 71
- Using a Wireless LAN PC Card 72
- 1 Insert the wireless LAN PC 72
- 1 Select “Eject PC Card” and 72
- Network Settings 73
- 2 Press in “Name” 73
- Setting the IP Address 74
- Setting the Wireless Channel 75
- Setting the SSID 76
- Setting the DHCP 77
- Network Settings (cont.) 78
- Using a Memory Card 79
- Using a Memory Card (cont.) 80
- Setting Lists 81
- Memory Card Settings 82
- Setting the Display 83
- Format of the Index Mode 83
- Using Autorun 83
- Memory Card Settings (cont.) 84
- Displaying a Still Image 85
- 1 Press to display “Button 85
- 2 Press 85
- COMPUTER 87
- 2 Press Function Button to 88
- 3 Hold down and move the 88
- 4 Press to cancel the opera 89
- Gamma Correction Function 90
- Selecting the Power Save Mode 91
- 1 Press to select 92
- 2 Press to change the image 92
- 3 Press , , or 92
- Setting On-screen Display 93
- Setting the Color Manage 94
- Auto Search Function 95
- Reducing Image Noise 96
- Setting the Video Signal 97
- Selecting a Startup Image 97
- Saving Projected Images 98
- Setting a Background Image 99
- Using an RGB Monitor 100
- Loop-out Adaptor 100
- Confirming the Lamp 100
- Usage Time 100
- 1 Press Undo on the remove 101
- Displaying the Break Timer 101
- Setting the Projection Mode 102
- Setting up the Keylock 103
- Canceling the Keylock 103
- Setting up a Password 104
- 1 Press or to select 104
- 3 Enter the password again in 104
- 1 Press , and to 105
- 2 Press , and to 105
- Setting the Anti-Theft 106
- Changing the Keycode 108
- Initializing the Settings 109
- Overview of ALL Menu 110
- Settings 110
- Carrying the Projector 112
- 2 Remove the inner padding 112
- Maintenance 113
- Maintenance Indicators 114
- Regarding the Lamp 115
- Regarding the Lamp (cont.) 116
- 1 Press on the projector to 116
- 2 Disconnect the power cord 116
- 3 Remove the lamp unit cover 116
- 4 Loosen the lamp unit 117
- 5 Insert the new lamp unit 117
- 6 Attach the lamp unit cover 117
- 1 Connect the power cord 117
- 2 Reset the lamp timer 117
- Connecting Pin Assignments 118
- Computer Compatibility Chart 119
- Troubleshooting 120
- For SHARP Assistance 122
- Specifications 123
- Dimensions 126
- Glossary 127
- SHARP CORPORATION 130
Related products and manuals for Data projectors Sharp PG-M25X
Data projectors Sharp XG-P610X Brochure
(4 pages)
(4 pages)
Data projectors Sharp PGSX85 Datasheet
(2 pages)
(2 pages)
Data projectors Sharp PGD50X3D Datasheet
(2 pages)
(2 pages)
(2 pages)
Data projectors Sharp PG-F267X Datasheet
(2 pages)
(2 pages)
Data projectors Sharp XG-F262X Datasheet
(2 pages)
(2 pages)
Data projectors Sharp XG-C335X Datasheet
(2 pages)
(2 pages)
Data projectors Sharp XR-1R Datasheet
(1 pages)
(1 pages)
Data projectors Sharp XR-10X Datasheet
(4 pages)
(4 pages)
Data projectors Sharp XG-C55X Datasheet
(1 pages)
(1 pages)
Data projectors Sharp XV-Z10E Datasheet
(1 pages)
(1 pages)
© 2020, manymanuals.com. All rights reserved. | 0.801 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals