Sharp 20F630 Service Manual download pdf (Page 8)

20F630

CU20F630

Service Mode Overview

1. Service mode is entered by SERVICE key input or CH-UP +VOL-DOWN input during reset.

2. Service mode is cleared by entering SERVICE key or CH-UP +VOL-DOWN key command during service mode.

3. If key input port (SERVICE) input is LOW, then it is in service mode.

4. During key input port (SERVICE) input is LOW, clearing service mode by key input SERVICE or CH-UP + VOL-

DOWN is disabled.

5. Service mode can be switched to 4 modes as follows by key input MENU;

SERVICE MODE

6. AFT processing is disabled during service mode. PLL setting data is set to fo data.

7. All user data are set to default during service mode. FAO and SPEAKER user settings are off and on respectively

in service mode. Energy Save is off.

8. Sleep timer, View timer and Off timer are inactivated in Service mode.

9. Sound is muting in service mode except at Adjustment Items V20, M01, M02, M03, M04, M05, and M06.

Option mode

Adjustment mode

First mode of service mode when SERVICE key is

pressed.

First mode of service mode when local key

CH-UP + VOL-DOWN is pressed after MCU reset.

Check mode

Setting mode

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 63 64

No comments

Sharp 20F630 Service Manual Page 8