Sharp MX-2610N Specifications download pdf (Page 12)

NAMES OF PARTS AND COMPONENTS, TURNING ON THE POWER

This machine has a main power switch, found at the

bottom left after the front cover is opened, and a power

button (

), located on the operation panel.

CAUTION

• When turning off the power, make sure that the indicators on the

operation panel turn off as well.

• If the machine suddenly turns off, such as in the event of a power failure,

turn the machine on again, and then turn off the machine following the

correct procedure for turning off the machine.

Switching off the main power switch or removing the power cord from the

outlet while any of the indicators are lit or blinking may damage the hard

drive and cause data to be lost.

• Switch off both the power button (

) and the main power switch and

unplug the power cord if you suspect a machine failure, if there is a bad

thunderstorm nearby, or when you are moving the machine.

• When using the fax or Internet fax function, always keep the main power switch in

the “

” position.

• In some states of the machine, pressing the power button (

) to restart will not

make the settings take effect. In this case, use the main power switch to switch

the power off and then on.

Turning on the power

• Switch the main power switch to the “

” position.

The main power indicator will light in orange. The

power button (

) does not function while the main

power indicator is lit in orange.

• After the main power indicator lights in green, press

the power button (

Turning off the power

(1) Press the power button ( ) to turn off the power.

(2) Switch the main power switch to the “

” position.

Restarting the machine

In order for some settings to take effect, the machine

must be restarted. If a message in the touch panel

prompts you to restart the machine, press the power

button (

) to turn off the power and then press the

key again to turn the power back on.

Main power indicator

Output tray (Centre tray)

Keyboard*

Automatic

document feeder

Operation

panel

Right tray

Paper pass unit*

Bypass tray

Front cover

Tray 5

(when a large capacity tray is installed)*

Tray 1

Tray 2

(when a paper feed tray is installed)*

Tray 3

(when a paper feed tray is installed)*

Tray 4

(when a paper feed tray is installed)*

Saddle Finisher*

Main power switch

Power button

Finisher*

* Optional

• Do not dispose of used toner cartridges. Place them in a plastic bag and keep them. The technician will collect the used toner cartridges when performing maintenance.

• To view the approximate amount of toner remaining, continually touch the [Home Screen] key during printing or when the machine is idle. The percentage of toner remaining will

appear in the display while the key is touched.

• When the percentage falls to “25-0%”, obtain a new toner cartridge and keep it ready for replacement.

• Depending on your conditions of use, the colour may become faint or the image blurred.

MAINTENANCE

When toner runs low, the colour and the message “Prepare a new toner cartridge.” appears.

Prepare a new toner cartridge for the indicated colour.

When toner runs out, the colour and the message “Replace the toner cartridge.” appears.

Replace the toner cartridge for the indicated colour.

Example: Replacing the yellow toner cartridge

When a paper misfeed occurs, the message “A misfeed has occurred.” will appear in the touch

panel and printing and scanning will stop.

In this event, touch the [Check how to remove misfeeds.] key in the touch panel.

When the key is touched, instructions for removing the misfeed will appear. Follow the

instructions. When the misfeed is cleared, the message will automatically clear.

Old toner cartridge

Shake 5 or 6 times Gently insert straight

into the machine

until it locks

CloseOpen

New toner cartridge

1 2 3 4 5

• Do not throw toner cartridges into a re. Toner may

y and cause burns.

• Store toner cartridges out of the reach of small

children.

• Always store toner cartridges on their sides. If toner

cartridges are stored on end, the toner may harden

and become unusable.

• Please use SHARP-recommended toner cartridges.

If toner cartridges other than SHARP-recommended

toner cartridges are used, the machine may not

attain full quality and performance and there is a risk

of damage to the machine.

• The fusing unit and the output unit are hot.

• Take care not to touch the fusing unit when

removing a misfeed.

• There is a risk of burning.

Replacing a toner cartridge

Removing misfeeds

Caution

Gently pull straight

out with both

hands

1 2 ... 7 8 9 10 11 12 13 14

Comments to this Manuals

No comments

Sharp MX-2610N Specifications Page 12

Comments to this Manuals

Related products and manuals for Copiers Sharp MX-2610N