Sharp AR-M230 Series Setup Guide download pdf (Page 14)

CONFIGURING THE PC-FAX DRIVER

WHEN USING A USB CABLE (if the

PC-FAX driver is installed)

When the PC-FAX function is used with a USB cable, the port used by the PC-FAX driver must be

configured. The PC-FAX driver uses the USB port that was created when the printer driver was

installed. Configure the port after installing the printer driver (pages 3 to 9).

Click the "start" button, click "Control

Panel", click "Printers and Other

Hardware", and then click "Printers and

Faxes".

In operating systems other than Windows XP,

click the "Start" button, select "Settings", and

then click "Printers".

Click the PC-FAX driver icon and select

"Properties" from the "File" menu.

Click the "Ports" tab and select a USB

port (for example, USB001) in the list.

In Windows 98/Me, click the "Details" tab

and select USB port in the "Print to the

following port" list box.

Click the "OK" button.

• The USB port name will vary

depending on the number of USB

ports created on your computer. If

the port created during installation of

the printer driver is your first USB

port, the name will be "USB001".

•

Select the USB port being used by the

AR-M230/M270 series printer driver.

The port used by the printer driver is

indicated by a checkmark in the

"Ports" tab of the printer driver

properties window. (In Windows

98/Me, the port is selected in "Print to

the following port" in the "Details" tab.)

Note

!!install_ar230270.book 12 ページ２００３年７月１０日　木曜日　午後１１時１５分

1 2 ... 9 10 11 12 13 14 15 16 17 18

No comments

Sharp AR-M230 Series Setup Guide Page 14