Sharp AR-201 User Manual download pdf (Page 48)

GENERAL INFORMATION

Transfer charger cleaning

If copies start becoming streaky or blotchy, the transfer charger may be dirty.

Clean the charger using the following procedure.

Turn the power switch off.

Open the bypass tray. Lift slightly on the side cover and

slide the cover out until it stops.

Gently lift and pull out the upper paper tray and take the

charger cleaner out by holding the tab.

Set the charger cleaner onto the transfer charger and

gently slide the cleaner in the direction indicated by the

arrow two or three times.

Slide the charger cleaner from one end to the other end

along the groove of the transfer charger. If the cleaner

is stopped on the way, smudges on copies may occur.

●

If the white sheet metal is smudged with toner, wipe it with a soft, clean

cloth.

Return the charger cleaner to its original position.

Close the upper paper tray. Close the side cover by

pressing the handle on the cover.

Turn the power switch on.

USER MAINTENANCE

User maintenance

Charger cleaner

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 83 84

No comments

Sharp AR-201 User Manual Page 48