Sharp AR-201 User Manual download pdf (Page 45)

GENERAL INFORMATION

POWER SAVE MODES

The copier has two power save modes to reduce overall power consumption

thereby reducing the cost of operation. In addition, these modes conserve

natural resources and help reduce environmental pollution. The two power

save modes are preheat mode and auto power shut-off mode.

●

User programs

The preheat activation time and the auto power shut-off time have been

preset at the factory to 90 sec.* for preheat mode and 30 min. for auto

power shut-off mode. These times can be changed using user programs.

It is suggested that you set appropriate times according to the actual usage

of the copier. See page 36.

* In European countries, the factory default setting is 30 sec.

Preheat mode

When the copier enters the preheat mode, the POWER SAVE ( ) indicator

will light up and other indicators will remain on or off as before. In this

condition, the fuser in the copier is maintained at a lower heat level, thereby

saving power. The preheat level is, however, high enough to allow the copier

to come to a ready condition or begin copying within 10 seconds after any

key input or copier operation such as paper tray operation is performed.

Auto power shut-off mode

When the copier enters the auto power shut-off mode, the POWER SAVE

( ) indicator will light up and all other indicators will go out. The auto

power shut-off mode saves more power but requires a longer time to warm

up before copying can begin.

Power save modes

As an ENERGY STAR

Partner,

SHARP has determined that this

product meets the ENERGY STAR

guidelines for energy efficiency.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 83 84

No comments

Sharp AR-201 User Manual Page 45