Sharp WQ-700H Specifications download pdf (Page 34)

34 Rockwell Automation Publication PFLEX-IN020C-EN-P - July 2013

PowerFlex 700S and 700H Frames 10...14 IP00, NEMA/UL Open Power Structures

PowerFlex 700H Control

Connections

Note: For PowerFlex 700S control connections, see PowerFlex 700S Control

Connections on page 40

The PowerFlex 700H control uses fiber optic connections and 24V DC supplied

from the ASIC circuit board, which is located on the power structure. Frame 12

and 14 drives contain two ASIC boards and two ASIC Feedback boards that

supply these connections.

Refer to the figures 19

, 20 and 21 for the location of the ASIC board(s).

Figure 19 - Frames 10 and 12 ASIC Board Locations

IMPORTANT

It may be necessary to disconnect the control connections during drive

installation and then re-connect according to the instructions in 700H Control

Connections on page 36

DANGERDANGER

DC BUS CONDUCTORS AND CAPACITORS

OPERATE AT HIGH VOLTAGE. REMOVE POWER

AND WAIT 5 MINUTES BEFORE SERVICING

DANGERDANGER

DC BUS CONDUCTORS AND CAPACITORS

OPERATE AT HIGH VOLTAGE. REMOVE POWER

AND WAIT 5 MINUTES BEFORE SERVICING

ASIC Board Assembly

Frames 10 and 12

Power Structure #2

Frame 12 Only

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 63 64

No comments

Sharp WQ-700H Specifications Page 34